All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: WD5000BMVV 11GNWS0 MODULE 11
PostPosted: June 26th, 2015, 15:03 
Offline

Joined: June 26th, 2015, 13:40
Posts: 11
Location: Kuwait
I have wD HDD model no :-WD5000BMVV 11GNWS0
the problem was it was getting detected but not showing me drive letter ,
it is Micro USB and MRTPRO dossent support micro USB so i imported Sata Card and change the U12 from Micro USb card to
Sata card , After this what i need to so i dont now need some one who can help me as i am new to this field.

Thanks


Top
 Profile  
 
 Post subject: Re: WD5000BMVV 11GNWS0 MODULE 11
PostPosted: June 26th, 2015, 18:04 
Offline
User avatar

Banned User

Joined: June 26th, 2015, 16:55
Posts: 6
Location: Providence, RI
Most likely the data is encrypted, so unless you have PC-3000 (which can decrypt on the fly), you'll need to do the following:
1. Image the entire drive onto another hard drive (encryption key is stored at the end)
2. Set the destination drive's LBA to be exactly what the original drive's LBA was
3. Find a My Book USB bridge which uses the same encryption chip as the original PCB to decrypt it.

Enjoy.

_________________
Data Recovery Cost


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group