HDD GURU FORUMS
http://forum.hddguru.com/

HDDS Horizontal Laminar Flow Cabinet M has arrived
http://forum.hddguru.com/viewtopic.php?f=26&t=35235
Page 1 of 1

Author:  Milos_HddSurgery [ April 10th, 2017, 10:22 ]
Post subject:  HDDS Horizontal Laminar Flow Cabinet M has arrived

Dear colleagues, we present you our latest product:

HDDS Horizontal Laminar Flow Cabinet M

Image

HddSurgeryTM Horizontal Laminar Flow Cabinet M is one of many steps that HddSurgery has taken in order to cover all the possible aspects of the daily needs of Data Recovery engineers. This time, HddSurgery advances into a new field, providing the adequate working environment, improving the quality of the work surroundings and thus increasing the success rate of Data Recovery activities.

HDDS Horizontal Laminar Flow Cabinet M incorporates all the standard features of an ordinary Laminar Flow Cabinet, enhanced with several Data recovery oriented aspects. Our engineering team has accented the design and the visual appearance of this product, while maintaining the ergonomic requirements.

Physical Dimensions:

Height: 1625mm

Width: 950mm

Depth: 780mm

Weight: 144kg

Power supply:

Input: 100-240 VAC (50/60 Hz) 3.5 A
Rated power: 270 W

Work Area Dimensions:

832,60 x 646,30 x 520mm

Work table height: 700mm

Airflow:

0.30 - 0.50m/s airflow velocity, adjustable via the touch screen

Pre-Filter: Polyester fibers with 85% arrestance

Main Filter: TROX™ Filter, H13, with >99,995% efficiency according to EN 1822.

Cabinet Lighting:

LED light panel 595x295mm, 4000K, up to 1950lx

Noise: 70dB

Side Windows:

Construction Tempered Glass

Visible Opacity: Semi-Transparent

UV Opacity: UV Absorbing

Color: Green Tint

Construction:

Color: White coated steel frame

Work Surface: Stainless Steel

Additional Features:

Blower: Ebm-papst™ external rotor motor, permanently lubricated, low noise and vibration levels

Electrical Controls: All controls are being handled via a touch screen

Monitoring: Air Pressure, Temperature, Humidity

Two MOLEX® ports with overload protection with retry

Electrical characteristics:

V5 = 5V +/- 0.25V

V12 = 12V +/- 0.6V

Check the PDF Manual, Promo teaser and Video guide.

Follow us on Facebook to stay updated with the news from our company.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/