HDD GURU FORUMS http://forum.hddguru.com/ |
|
Pinout of monolithic Pen drive DTSE9 8GB http://forum.hddguru.com/viewtopic.php?f=27&t=30338 |
Page 1 of 1 |
Author: | HaQue [ January 14th, 2015, 10:47 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
A DATA Recovery lab can connect to the round pads and attempt to access the NAND directly. It is a common recovery, though success varies. If you do not own Flash recovery tools, this is not DIY due to the complexity of wear levelling algorithms, DATA whitening and knowing how to successfully dump the NAND in the first place (pinouts, chip config etc.) If you say your location, a local DR Lab can be suggested. |
Author: | arvika [ January 14th, 2015, 19:48 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
http://odzyskiwanie-danych.com.pl/image ... arvika.jpg looks same. My pinout should fit. |
Author: | Tiago Costa [ January 30th, 2015, 6:12 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
Yes it is the same. How can i conect it to pc3000. Do you have any suggestion? thanks. |
Author: | Sasha Sheremetov [ January 30th, 2015, 6:36 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
You will need a thin wires connected to special Monolith adapter this way |
Author: | HaQue [ January 30th, 2015, 8:34 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
That's a beautiful picture (but I am kinda biased!) Looks like in the process of pinout discovery for the wires to be also on SD Pads |
Author: | arvika [ January 30th, 2015, 16:09 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
What a beautiful color of wires! I have only one color... |
Author: | scratchy [ June 9th, 2015, 7:20 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
You can get cables like that (single strand) from old telephone cables - or new telephone cables |
Author: | einstein9 [ June 9th, 2015, 8:59 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
Sasha Sheremetov wrote: You will need a thin wires connected to special Monolith adapter this way I really like and love your work Sasha... You and arvika (Michal) Artistic work... |
Author: | RDane [ January 23rd, 2016, 8:40 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
Hi, You can also use small copper wires from traffo |
Author: | Amarbir[CDR-Labs] [ January 24th, 2016, 6:20 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
RDane wrote: Hi, You can also use small copper wires from traffo Rdane . Can We Have a Link of What you are Referring To |
Author: | HaQue [ January 24th, 2016, 8:15 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
Amarbir wrote: RDane wrote: Hi, You can also use small copper wires from traffo Rdane . Can We Have a Link of What you are Referring To any thin wires will do, you just need to test to see how well it solders. common places to fild it: in DC power cords, split the strands - generally about .09mm, wrapping wire for transformers etc, can be pretty thin, usb cables, charger cables etc. |
Author: | Amarbir[CDR-Labs] [ January 25th, 2016, 5:13 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
HaQue wrote: Amarbir wrote: RDane wrote: Hi, You can also use small copper wires from traffo Rdane . Can We Have a Link of What you are Referring To any thin wires will do, you just need to test to see how well it solders. common places to fild it: in DC power cords, split the strands - generally about .09mm, wrapping wire for transformers etc, can be pretty thin, usb cables, charger cables etc. Oh , Was he referring to enameled copper wire ? i think so this is what he meant |
Author: | Sasha Sheremetov [ January 25th, 2016, 7:43 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
You can use basically any thin (0.05-0.1mm) enameled copper wire for more precise work, as RDane said. This wire on picture is a way too thick for smallest monolith pads (vias) with diameter ~0.3mm, but works fine for Sandisk SDs Thin one looks like this |
Author: | hdd2fix [ March 16th, 2016, 16:55 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
arvika wrote: What a beautiful color of wires! I have only one color... From RJ45 we can get even more colors or hue, or single wire from rj45 will be to tick? I think so, I will check |
Author: | HaQue [ March 16th, 2016, 17:54 ] |
Post subject: | Re: Pinout of monolithic Pen drive DTSE9 8GB |
cat5, cat6 cable way too thick. make sure you test with vernier calipers and make sure wire thickness < 0.1mm |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |