All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: ratio between vcc and vccq
PostPosted: January 23rd, 2018, 10:07 
Offline

Joined: March 5th, 2012, 11:17
Posts: 37
Location: argentina
Hello Vnr users, how are you all ?

I have a case is a pendrive and the memorie is very damage after all night trying to correct one dump only correct half with 74% of error. Now the voltages in the reader are settings in vcc 2.3 V and Vccq 3.3 V. And now i am thinking to low the voltage to 1.8v of vcc but is necessary low the Vccq to and in a specific ratio between the 2 voltages.

Thanks very much
My best regards


Top
 Profile  
 
 Post subject: Re: ratio between vcc and vccq
PostPosted: January 23rd, 2018, 11:35 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
depends on the chip. I wouldn't go lower thank 2.2 for vcc... never seen good results lower. Maybe read retry needs to be tinkered with, or vcc applied to other pins. have you tried lowering vccq and raising slightly vcc

You should add the chip part number and ID.

Are the pins nice and clean?

cheers


Top
 Profile  
 
 Post subject: Re: ratio between vcc and vccq
PostPosted: January 26th, 2018, 11:10 
Offline

Joined: March 5th, 2012, 11:17
Posts: 37
Location: argentina
HaQue thanks very much to answer my question!!!!!


is possible improve the reading lowering the vccq and raise up vcc ? i belive the reading impreve when the voltage of the core are lower

Thanks very much

my best regards


Top
 Profile  
 
 Post subject: Re: ratio between vcc and vccq
PostPosted: January 26th, 2018, 12:12 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
Yes you can try that too. just don't raise VCC too much.

You should add the chip part number and ID to this post.


Top
 Profile  
 
 Post subject: Re: ratio between vcc and vccq
PostPosted: January 26th, 2018, 12:52 
Offline

Joined: March 5th, 2012, 11:17
Posts: 37
Location: argentina
the id is 983A98A376
and the part number is fd32b08uch1-49

thanks very much HaQue
my best regards


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group