HDD GURU FORUMS http://forum.hddguru.com/ |
|
Read Chip ID says 2 crystals, but model number says only 1 http://forum.hddguru.com/viewtopic.php?f=27&t=36633 |
Page 1 of 1 |
Author: | HaQue [ March 30th, 2018, 21:15 ] |
Post subject: | Re: Read Chip ID says 2 crystals, but model number says only |
you can have same ID with any number of crystals. same ID can be used for different chips, as Toshiba will sell just nand chip for other manufacturers to put in microsd, or in other package. you most often can just change number of crystals and use everything else for that ID as it is. Some IDs might be DDR, other chips with same ID might not, so try changing the SDR value as well.. Reason it isn't in database for 4 ID's is probably they haven't come across it yet to test. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |