HDD GURU FORUMS
http://forum.hddguru.com/

BGA100 PF516 manufacturer help
http://forum.hddguru.com/viewtopic.php?f=27&t=43681
Page 1 of 1

Author:  Data-Salvage [ September 18th, 2023, 22:28 ]
Post subject:  BGA100 PF516 manufacturer help

hello does somebody know the manufacture of this BGA100?? it was inside an SD card . iv found on internet that some come with the S logo but i dont know the name of the manufacture

Attachments:
S logo.JPG
S logo.JPG [ 14.44 KiB | Viewed 20256 times ]

Author:  fzabkar [ September 19th, 2023, 0:05 ]
Post subject:  Re: BGA100 PF516 manufacturer help

Spectek = Micron's rejects

https://www.spectek.com/menus/mark_code.aspx

Author:  fzabkar [ September 19th, 2023, 13:46 ]
Post subject:  Re: BGA100 PF516 manufacturer help

What is Spectek NAND flash?
https://www.hddoracle.com/viewtopic.php?p=23002#p23002

Author:  csava [ September 19th, 2023, 21:29 ]
Post subject:  Re: BGA100 PF516 manufacturer help

Superman recently discovered that his supercomputer was experiencing issues and needed a replacement storage device. He heard about an emerging flash memory manufacturing company called "Spectek," which claimed to produce the most powerful flash memory products in the universe.

So, Superman swiftly flew to the headquarters of "Spectek" to purchase their latest flash memory product. As he entered the company's lobby, a sales representative named Flashy Jack welcomed him.

Flashy Jack: "Welcome, Mr. Superman! Would you like to purchase our latest flash memory product?"

Superman: "Yes, please give me the fastest flash memory you have. I need to store a vast amount of superhero data."

Flashy Jack: "Certainly! We have a special 'Spectek Lightning Flash Memory' that's as fast as the cosmos!"

Superman: "That's fantastic! I'll take one."

Flashy Jack handed Superman a "Spectek Lightning Flash Memory," which gleamed and looked genuinely cool.

Superman: "Thank you! With this, I can store even more supervillain profiles."

Author:  fzabkar [ September 19th, 2023, 23:11 ]
Post subject:  Re: BGA100 PF516 manufacturer help

csava wrote:
Superman recently discovered that his supercomputer was experiencing issues and needed a replacement storage device.

Good one!

Author:  Data-Salvage [ October 3rd, 2023, 1:55 ]
Post subject:  Re: BGA100 PF516 manufacturer help

fzabkar wrote:



you are amazing!!!!
do you know what pin is this BGA???
it was on SD card.. customer said is an BGA100. but the pads doesnt match with the bga100 stencil

Attachments:
IMG_0523.JPG
IMG_0523.JPG [ 495.77 KiB | Viewed 19689 times ]
BGA100 pinout.JPG
BGA100 pinout.JPG [ 84.03 KiB | Viewed 19694 times ]
bga100.JPG
bga100.JPG [ 99.04 KiB | Viewed 19695 times ]

Author:  fzabkar [ October 3rd, 2023, 3:46 ]
Post subject:  Re: BGA100 PF516 manufacturer help

https://nand.gq/#/decode?pn=FBNL73ANAKDUABH3
https://nand.gq/#/decode?pn=FBML73ANAKDUABH3
https://nand.gq/#/decode?pn=PF516

Micron L73A datasheet:

https://pdf-html.ic37.com/pdf_file_U1/20200531/pdf_pdf/uploadpdf_old/MICRON/MT29F32G08CBACA_datasheet_1024449/166580/MT29F32G08CBACA_datasheet.pdf

Author:  Data-Salvage [ October 5th, 2023, 2:05 ]
Post subject:  Re: BGA100 PF516 manufacturer help

fzabkar wrote:



thank you very much. do you think is VBGA100?? the pads still doesnt match..................
im very very confused. do you have similar experience???

Author:  fzabkar [ October 5th, 2023, 14:11 ]
Post subject:  Re: BGA100 PF516 manufacturer help

I have no experience in this area.

Author:  Gregory [ October 6th, 2023, 15:49 ]
Post subject:  Re: BGA100 PF516 manufacturer help

Data-Salvage wrote:
the pads still doesnt match..................
im very very confused
its match with Micron BGA100 pdf - just two channel sharing this same lines on your SD card PCB

Author:  Data-Salvage [ October 18th, 2023, 9:00 ]
Post subject:  Re: BGA100 PF516 manufacturer help

Gregory wrote:
Data-Salvage wrote:
the pads still doesnt match..................
im very very confused
its match with Micron BGA100 pdf - just two channel sharing this same lines on your SD card PCB


Sir the pads doesnt match with BGA100 stencil

Author:  HaQue [ October 18th, 2023, 20:46 ]
Post subject:  Re: BGA100 PF516 manufacturer help

is your stencil a 10x10? maybe look at the pitch of the pads and match it up with a stencil that way. possibly a BGA88 might match

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/