Western Digital module, upgrade to 2.3.8.0:

1. Added family ApolloCR- 810011, Tresul- 800068

2. Added firmware unlock support for board numbers 800022/800041/810012 and 810035

3. Added permanent unlocking of 800xx series (unlocking needs to be used with the new programmer 3.0), removed the terminal handshake process, and supports unlocking by USB board number. The supported board numbers are as follows:
800022/800041/810012, 800065/800067/810003, 800066/800069, 800077, 810011, 810035

4. Added the "Firmware Unlock" button on the family panel and removed the "Unlock Handshake" button

5. Added T2 editor support for 810035, support uploading 190 to hard disk memory

6. Add hex page right-click to save the selection to the file

7. Added the sub-module analysis function in the module (ROM, 109 module)
1) Search and display listings
2) Save the selected module to a file
3) Load from file and replace

8. Added Western Digital backup module size setting

9. Optimize the T2 editor's handling of 190 partial entries corrupted or abnormal data

10. Optimize the family and board number classification of the family panel

11. Optimize the startup process, no serial connection is required to enter the program

12. Optimize and remove the "unlock handshake" function of the ROM tool

13. Optimize and remove the "unlock handshake" function in the shortcut bar on the right


Seagate module, upgrade to 2.0.8.1:

1. Added family panel CF family (Note: reading and writing ROM needs to unsolder the ROM chip, which is caused by the firmware download lock)

2. Added M15_Janus-CF family firmware unlock (ST4000LM024-2U8, ST5000LM000-2U8)

3. Added M15_Janus-CF family virtual boot (ST4000LM024-2U8, ST5000LM000-2U8)

4. Added Preamp type display, path: Edit ROM file - Edit ROM information - Edit SAP logic tag

5. Added ROM logic head bitmap for more families:

75 - ST500LT012

81 - ST1000LM033
86 - ST500LM021
8A - ST4000LM016

8C - ST2000LM007, ST2000LX001

A5 - ST2000LM007

AF - ST1000LM048, ST1000LM035, ST2000LM015, ST2000LM007
6. Added the default read ROM size with family ID of 91 to solve the crash problem caused by abnormal ROM size
7. Added track list view

8. Optimized firmware unlock and virtual boot support for 91, 97, B2, B5 families

9. Optimize the initialization process. When the firmware information has been obtained and the program is re-entered to select the last path, the firmware will be loaded from the file first.

10. Optimize the sorting display of the system file list, and display volume 0 and volume 3 first

11. Optimize the main interface to display the COM connection port number directly

12. Fixed the error that some families reported 0xC00000005 during ROM parsing

13. Repair the module list edit box ID does not follow the module selected by the cursor to update

14. Repair some LM disks to output MCMT analysis results. After the progress reaches 99%, the MRT crashes.


DE module, upgrade to 6.0.0.2:

1. Added Data Explorer support for USB device splitting (800xx series may need to unlock firmware, splitting requires modules 183 and 190)

2. Added Data Explorer factory program to read support for USB devices (800xx series may need to unlock the firmware)

3. Added 3 copy types and color marks: Seagate data 241A, sEDU sector, data all 0 sectors (for the loss of memory 190, some mirror data is 00)

4. Added task statistics. Added sector bitmap statistics and clearing options for the above-added copy types.
5. Added stream scan format: CHM, Z7, WMF, ANI, MID, OGG

5. Optimize the "read successful" green sector type to "read normal and non-0" sector

6. Optimize and greatly improve the speed of marking valid data

7. Optimize the function of saving files and fix the problem of failure to save very small files

8. Optimize the compressed bitmap mapping algorithm and fix the crash when the compressed data is abnormal