| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| How to Use MRT Pro ROM Programmer http://forum.hddguru.com/viewtopic.php?f=28&t=31350 |
Page 1 of 1 |
| Author: | emad11111 [ June 5th, 2015, 15:53 ] |
| Post subject: | How to Use MRT Pro ROM Programmer |
How to Use MRT Pro ROM Programmer https://youtu.be/3st9Ghhng1c ------------------------------------------------------------------------------------ Middle East distributor (MRT PRO) Data recovery Company name: egychip Address: 30 Street last Faisal Saleem pyramid brief QQ: 2511800410 E-mail: emad_mostafa2020@live.com http://www.egychip.com/vb ------------------------------------------------------------------------------------- |
|
| Author: | michael chiklis [ June 7th, 2015, 11:12 ] |
| Post subject: | Re: How to Use MRT Pro ROM Programmer |
Doesn't work with 1.8V rom chips as for Barracuda 7200.14 PCBs, it will kill them! |
|
| Author: | siamak5561 [ November 11th, 2018, 2:15 ] |
| Post subject: | Re: How to Use MRT Pro ROM Programmer |
michael chiklis wrote: Doesn't work with 1.8V rom chips as for Barracuda 7200.14 PCBs, it will kill them! Are you sure about this? |
|
| Author: | mhp666 [ November 11th, 2018, 14:40 ] |
| Post subject: | Re: How to Use MRT Pro ROM Programmer |
I personally would leave the card still and would never use that programmer. I see it as a patch that with some error could break the SATA card, and that would be a problem. A programmer like EZP2013 with the 1.8v adapter can be obtained for $ 25 and is made for that function. |
|
| Author: | michael chiklis [ November 13th, 2018, 0:11 ] |
| Post subject: | Re: How to Use MRT Pro ROM Programmer |
I don't know if exist a new MRT external programmer that is compatible with 1,8V roms, i still have that old version which i used only once (now is just getting the dust). When i've to read/write roms outside the board, i use Revelprog that supports very well 1,8V SPI rom chips. https://www.reveltronics.com/en/product ... rammer-usb With recent upgrade (version 1.8.0), Revelprog supports also some SPI NAND flash memories. https://forum.reveltronics.com/viewtopi ... =23&p=1949 https://forum.reveltronics.com/viewtopic.php?f=23&t=381 |
|
| Author: | pepe [ March 7th, 2019, 21:05 ] |
| Post subject: | Re: How to Use MRT Pro ROM Programmer |
a client of mine killed ROM of a seagate using some MRT adapter with wrong voltage... Luckily i was able to recover it. So carefully with those... pepe |
|
| Author: | pepe [ March 7th, 2019, 21:06 ] |
| Post subject: | Re: How to Use MRT Pro ROM Programmer |
a client of mine killed ROM of a seagate using some MRT adapter with wrong voltage... Luckily i was able to recover it. So carefully with those... pepe |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|