HDD GURU FORUMS
http://forum.hddguru.com/

How to Use MRT Pro ROM Programmer
http://forum.hddguru.com/viewtopic.php?f=28&t=31350
Page 1 of 1

Author:  emad11111 [ June 5th, 2015, 15:53 ]
Post subject:  How to Use MRT Pro ROM Programmer

How to Use MRT Pro ROM Programmer


https://youtu.be/3st9Ghhng1c


------------------------------------------------------------------------------------
Middle East distributor (MRT PRO) Data recovery
Company name: egychip
Address: 30 Street last Faisal Saleem pyramid brief
QQ: 2511800410
E-mail: emad_mostafa2020@live.com
http://www.egychip.com/vb

-------------------------------------------------------------------------------------

Author:  michael chiklis [ June 7th, 2015, 11:12 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

Doesn't work with 1.8V rom chips as for Barracuda 7200.14 PCBs, it will kill them!

Author:  siamak5561 [ November 11th, 2018, 2:15 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

michael chiklis wrote:
Doesn't work with 1.8V rom chips as for Barracuda 7200.14 PCBs, it will kill them!


Are you sure about this?

Author:  Spildit [ November 11th, 2018, 8:59 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

siamak5561 wrote:
michael chiklis wrote:
Doesn't work with 1.8V rom chips as for Barracuda 7200.14 PCBs, it will kill them!


Are you sure about this?


At the time this was posted, YES. 100% sure.

Maybe now they have a new programmer that do support 1.8V, I don't know but the one used back in 2015 would not support 1.8V ROM chips ...

Author:  mhp666 [ November 11th, 2018, 14:40 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

I personally would leave the card still and would never use that programmer.
I see it as a patch that with some error could break the SATA card, and that would be a problem. A programmer like EZP2013 with the 1.8v adapter can be obtained for $ 25 and is made for that function.

Author:  michael chiklis [ November 13th, 2018, 0:11 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

I don't know if exist a new MRT external programmer that is compatible with 1,8V roms, i still have that old version which i used only once (now is just getting the dust).
When i've to read/write roms outside the board, i use Revelprog that supports very well 1,8V SPI rom chips.
https://www.reveltronics.com/en/product ... rammer-usb

With recent upgrade (version 1.8.0), Revelprog supports also some SPI NAND flash memories.
https://forum.reveltronics.com/viewtopi ... =23&p=1949
https://forum.reveltronics.com/viewtopic.php?f=23&t=381

Author:  pepe [ March 7th, 2019, 21:05 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

a client of mine killed ROM of a seagate using some MRT adapter with wrong voltage...
Luckily i was able to recover it.
So carefully with those...

pepe

Author:  pepe [ March 7th, 2019, 21:06 ]
Post subject:  Re: How to Use MRT Pro ROM Programmer

a client of mine killed ROM of a seagate using some MRT adapter with wrong voltage...
Luckily i was able to recover it.
So carefully with those...

pepe

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/