| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ST500LT012 - PCB NOT WORKING http://forum.hddguru.com/viewtopic.php?f=28&t=33505 |
Page 1 of 1 |
| Author: | AchilleCotone [ May 24th, 2016, 3:47 ] |
| Post subject: | ST500LT012 - PCB NOT WORKING |
Hello i have a SEAGETE MOMENTUS THIN ST500Lt012 with the pcb not working, i bought a donator pcb and i did a chip off the original rom on the new pcb but the hd don't run. Do you help me? there is an other solution? tnx |
|
| Author: | jermy [ May 24th, 2016, 9:35 ] |
| Post subject: | Re: ST500LT012 - PCB NOT WORKING |
I hope you didn't damage the the chip during the transfer |
|
| Author: | AchilleCotone [ May 25th, 2016, 4:07 ] |
| Post subject: | Re: ST500LT012 - PCB NOT WORKING |
Spildit wrote: You will need to check PCB with TTL, check drive output with TTL and check ROM as well. Can i check with TTL the Original's pcb (not working) or donator's pcb (with your orginal's rom)? tnx |
|
| Author: | mikail13 [ August 21st, 2016, 5:43 ] |
| Post subject: | Re: ST500LT012 - PCB NOT WORKING |
ST500LT012 has 2 different PCB. PCB number must be the same.. viewtopic.php?f=1&t=31674 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|