All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Instruction Video of head-cutting technique for Seagate F3
PostPosted: July 15th, 2016, 22:21 
Offline
User avatar

Joined: May 25th, 2016, 23:16
Posts: 5
Location: Wuhan
Currently, there is a good demand of head-cutting technique for Seagate F3 in the field of HDD repair. However, up to the present, there is no actual effective process or technique in the market. Preciously, a method appeared that it tries to block head via putting the whole LBA of the head into non-resident G-list. Actually, this method has little effect because the blocked head hasn’t been cut and still works. Real head-cutting method for Seagate F3 should be letting servo system neglect the damaged head actually via modifying firmware. At present, in order to block the head, several simple methods are invented,such as adding to the D-list or adjusting RAP which all have big drawbacks and little effect with blocked head still working. Thus, it is hard for you to effectively repair the HDD.

We have done deep research in Seagate firmware and servo system, finally finding a real head-cutting technique for Seagate F3. The technique makes it possible to cut random head, cut zero head and redefine main head. Head can be cut whether the HDD is ready or not (such as caused by its damaged zero head), after which we define head one as main head. There is no need to adjust the adaptive parameter after the head being cut. So it is easy to operate.

We have made an instruction video to demonstrate the operation step by step. In this video, you will know the features of Seagate HDD, the head-cutting principle and technique and operation steps that is easy to follow. Just click the link attached to download this video. This is probably the most effective head-cutting method for Seagate HD. We hope it can help others.


Attachments:
Seagate head-cutting instruction video.rar [15.07 MiB]
Downloaded 1270 times
Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 17th, 2016, 22:22 
Offline

Banned User

Joined: July 12th, 2016, 3:44
Posts: 1
Location: Singapore
wow, seems like a very powerful tools to refurbish F3 ST disk, will go to your website for more detailed information about your products, thanks! :lol:


Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 19th, 2016, 5:44 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1314
Location: Italy
Nice :D


Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 21st, 2016, 15:44 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1314
Location: Italy
In my opinion MRT staff should focus more on data recovery utility instead of head cut or similar stuff that is needed only for hdd refurbishing.
Example of what we really need is support for SED drives!!

At the moment we can't work on new Seagate SED drives as Megaladon and Lombard families, because is not possible to access into SA, also WD SED are not supported yet (example some Hubble LT families).
When MRT will support this drives for data recovery?
Please, study a solution for SED drives, thanks.

P.S.
On this forum very few people are interested on hdd refurbishing. most of us are in DR field.
There is a new competitor (EDR) of you that now supports SED drives, it's located in my country (Italy), this means that now PC3000 is not the only that supports SED.
http://www.edrtools.eu/index.php/seagat ... or-seagate


Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 21st, 2016, 22:09 
Offline
User avatar

Joined: May 25th, 2016, 23:16
Posts: 5
Location: Wuhan
We are also constantly researching and developing new data recovery functions.
At present, WD SED related function is being developed. And it will be launched in our next software upgrade.

_________________
MRT Data Recovery Tools, which can bear comparison with PC3000 Tools
MRT can support Seagate F3 Head/Zone shielding
http://en.mrtlab.com/contact-us


Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 25th, 2016, 22:11 
Offline
User avatar

Joined: May 25th, 2016, 23:16
Posts: 5
Location: Wuhan
Yes. MRTLab is considering doing better.

_________________
MRT Data Recovery Tools, which can bear comparison with PC3000 Tools
MRT can support Seagate F3 Head/Zone shielding
http://en.mrtlab.com/contact-us


Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 25th, 2016, 22:23 
Offline

Joined: September 27th, 2005, 8:21
Posts: 763
mrtlab123 and greenhand are the same person = both banned for shilling

_________________
Dmitry


Top
 Profile  
 
 Post subject: Re: Instruction Video of head-cutting technique for Seagate
PostPosted: July 25th, 2016, 22:50 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2323
Location: Ontario, Canada
I had suspicion based on similar posts on other forums with a different user ID.

_________________
Luke
RAID Data Recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group