HDD GURU FORUMS http://forum.hddguru.com/ |
|
Seagate Constellation CS ST3000NC000 terminal issues http://forum.hddguru.com/viewtopic.php?f=28&t=36185 |
Page 1 of 1 |
Author: | Adisa [ December 13th, 2017, 4:25 ] |
Post subject: | Seagate Constellation CS ST3000NC000 terminal issues |
Hi everyone. I am having some problems with this disc. The terminal is disabled. When I start it without doing anything it gives me: Code: Boot 0x40M Spin Up Trans. Spin Up SpinOK LED:000000BD FAddr:00005656 LED:000000BD FAddr:00005656 I try to access the terminal, bit that gives me: Code: Boot 0x40M Spin Up Trans. Spin Up SpinOK (P) SATA Reset ASCII Diag mode F3 T> &> (1Ah)-TCG Serial Port Disabled The disc ends up en BSY state. How can I solve this? Thanks! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |