Switch to full style
Everything related to MRT tools
Post a reply

2Tb WD HDD

February 10th, 2018, 13:29

Technology mode key : ..........................: OK

RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 4
Head map : .....................................: 33
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xFE16
Control version : ..............................: A5C0

Zone allocation table : ........................: Err

ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 512 Kb
ROM version : ..................................: 01.55C
ROM generation : ...............................: 01.55C
Link table version : ...........................: 02.55
ROM Firmware version : .........................: 00010055

ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 4
Heads number in use : ..........................: 4
heads map : ....................................: 0,1,4,5

SA Module Dir Loading...
Load SA Module dir : ...........................: Error, suggest to load from the file
Configuration reading : ........................: Err


I need Data , please suggest next steps for recover data
Attachments
mrta.jpg

Re: 2Tb WD HDD

February 10th, 2018, 15:01

applpp22 wrote:
(...)
I need Data , please suggest next steps for recover data


Send the drive to a proper data recovery firm ? Start by learning the basic stuff first with test drives and only then move to client drives ?

Block SA access by shorting points, try to see if in Kernel you can re-initialize DIR and read native FW. If so when you get the modules load 11 to RAM. Check damaged modules and start from there.

This assuming the drive is spinning, calibrating and keeps on spinning. If the drive clicks and / or spins down you might have other issues like damaged heads.

Re: 2Tb WD HDD

February 11th, 2018, 2:39

The Drive is keep Spinning

Re: 2Tb WD HDD

February 11th, 2018, 6:43

Block SA access (easy way by shorting points) and then try to re-initialize dir (if you can read it from the drive). If DIR is damaged try to load it to RAM from file. Can you access modules now ?

Re: 2Tb WD HDD

February 13th, 2018, 20:04

I don't have MRT but the procedure with WDMarvel would be something like this :

http://www.hddoracle.com/viewtopic.php?f=193&t=2339

I will write one for SeDiv as well but it's almost the same ...

Re: 2Tb WD HDD

February 14th, 2018, 10:03

And here :

http://www.hddoracle.com/viewtopic.php?f=182&t=2340

I've written the same sort of guide for SeDiv as well.
Post a reply