HDD GURU FORUMS
http://forum.hddguru.com/

2Tb WD HDD
http://forum.hddguru.com/viewtopic.php?f=28&t=36414
Page 1 of 1

Author:  applpp22 [ February 10th, 2018, 13:29 ]
Post subject:  2Tb WD HDD

Technology mode key : ..........................: OK

RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 4
Head map : .....................................: 33
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xFE16
Control version : ..............................: A5C0

Zone allocation table : ........................: Err

ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 512 Kb
ROM version : ..................................: 01.55C
ROM generation : ...............................: 01.55C
Link table version : ...........................: 02.55
ROM Firmware version : .........................: 00010055

ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 4
Heads number in use : ..........................: 4
heads map : ....................................: 0,1,4,5

SA Module Dir Loading...
Load SA Module dir : ...........................: Error, suggest to load from the file
Configuration reading : ........................: Err


I need Data , please suggest next steps for recover data

Attachments:
mrta.jpg
mrta.jpg [ 363.7 KiB | Viewed 319 times ]

Author:  Spildit [ February 10th, 2018, 15:01 ]
Post subject:  Re: 2Tb WD HDD

applpp22 wrote:

(...)
I need Data , please suggest next steps for recover data


Send the drive to a proper data recovery firm ? Start by learning the basic stuff first with test drives and only then move to client drives ?

Block SA access by shorting points, try to see if in Kernel you can re-initialize DIR and read native FW. If so when you get the modules load 11 to RAM. Check damaged modules and start from there.

This assuming the drive is spinning, calibrating and keeps on spinning. If the drive clicks and / or spins down you might have other issues like damaged heads.

Author:  applpp22 [ February 11th, 2018, 2:39 ]
Post subject:  Re: 2Tb WD HDD

The Drive is keep Spinning

Author:  Spildit [ February 11th, 2018, 6:43 ]
Post subject:  Re: 2Tb WD HDD

Block SA access (easy way by shorting points) and then try to re-initialize dir (if you can read it from the drive). If DIR is damaged try to load it to RAM from file. Can you access modules now ?

Author:  Spildit [ February 13th, 2018, 20:04 ]
Post subject:  Re: 2Tb WD HDD

I don't have MRT but the procedure with WDMarvel would be something like this :

http://www.hddoracle.com/viewtopic.php?f=193&t=2339

I will write one for SeDiv as well but it's almost the same ...

Author:  Spildit [ February 14th, 2018, 10:03 ]
Post subject:  Re: 2Tb WD HDD

And here :

http://www.hddoracle.com/viewtopic.php?f=182&t=2340

I've written the same sort of guide for SeDiv as well.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/