HDD GURU FORUMS http://forum.hddguru.com/ |
|
salvationdata supported mrt not supported http://forum.hddguru.com/viewtopic.php?f=28&t=36731 |
Page 1 of 1 |
Author: | Jirbun [ April 24th, 2018, 18:14 ] | |||
Post subject: | Re: salvationdata supported mrt not supported | |||
Both E380 and E680 not supported also with the "basic access method" I think all XXXXA7 not supported.
|
Author: | Tawfeek [ April 29th, 2018, 12:43 ] |
Post subject: | Re: salvationdata supported mrt not supported |
Div 1 mrt 0 mrt need first to fix there Bugs , then support new families . |
Author: | Jirbun [ May 2nd, 2018, 8:28 ] |
Post subject: | Re: salvationdata supported mrt not supported |
Tawfeek wrote: then support new families . You mean more families, the disk is from may 2014. |
Author: | lcoughey [ May 2nd, 2018, 15:52 ] |
Post subject: | Re: salvationdata supported mrt not supported |
A while back, I was able to show (MRT support) them via a remote session that A9 was not supported either. A healthy drive that I was able to backup the SA and read with no problems (a few bad sectors) on PC3K, but MRT would refuse to read allow for SA access, no matter which utility they tried...and they tried them all. Although there is no A9 series, my guess is that it should read via the universal utility or even the A7, if there weren't a glitch somewhere. |
Author: | lcoughey [ May 2nd, 2018, 17:55 ] |
Post subject: | Re: salvationdata supported mrt not supported |
DE can access lba fine. It is a matter of not accessing the SA on MRT. sorry for the brain fart about intermixing families...thinking non arm families while talking about arm families. |
Author: | Jirbun [ May 2nd, 2018, 20:14 ] | ||
Post subject: | Re: salvationdata supported mrt not supported | ||
Spildit wrote: On Select Family : You see correct family in MRT LOG . I should have mentioned,MRT didn't select the family like he does automatically in A9,I select it manually.
|
Author: | Jirbun [ May 6th, 2018, 13:13 ] |
Post subject: | Re: salvationdata supported mrt not supported |
Spildit wrote: Did you try to put a checkmark on that box - Tech-Key detection ? Yes I tried,no access to SA as well. |
Author: | unknown [ May 6th, 2018, 13:48 ] |
Post subject: | Re: salvationdata supported mrt not supported |
Did you try to select 5450A7 with Tech-key detection checked? |
Author: | Jirbun [ June 16th, 2018, 18:19 ] |
Post subject: | Re: salvationdata supported mrt not supported |
Finally with the new version 2.1.2.3 the hitachi arm XXXXA7 supported if we checked Tech-key detection. Thank you Mrt |
Author: | lcoughey [ June 17th, 2018, 17:38 ] |
Post subject: | Re: salvationdata supported mrt not supported |
I can confirm it worked with a test case friday. |
Author: | mrtpro [ June 18th, 2018, 21:10 ] |
Post subject: | Re: salvationdata supported mrt not supported |
Hi, all, Thanks for your support, we will continue to work hard on your needs. MRT Sales consultant--Pink Email: sales@mrtlab.com Skype: sales@mrtlab.com QQ:3292109557 |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |