HDD GURU FORUMS
http://forum.hddguru.com/

Solution of ST LM Series’ User Sector Access Interruption
http://forum.hddguru.com/viewtopic.php?f=28&t=36923
Page 1 of 1

Author:  mrtpro [ June 8th, 2018, 5:15 ]
Post subject:  Solution of ST LM Series’ User Sector Access Interruption

Seagate LM series hard drives, such as 8C(LM035), A5(LM048) etc., due to some specific technical reasons of them, once the operation of recalculating translator is done, it will lead to malfunction of “user sector access interruption”. There is no way to repair such a malfunction after it was being generated, we can only try to backup system files to avoid and restore the hard drives to the status before recalculating the translator. Prevent users to create this malfunction in the beginning is the so-called method to solve “user sector access interruption”.

MRT Lab released its new software (version 2.1.2.3) on 8th, June, 2018. Its Seagate utility can support the read and write of system file. Even though there is no advanced firmware backup, it can also effectively solve “user sector access interruption” malfunction of LM series. Please refer to those following manuals about the principle and solutions to deal with “user sector access interruption”:

http://us.mrtlab.com/tech/seagate/246.html
http://us.mrtlab.com/tech/seagate/247.html
http://us.mrtlab.com/tech/seagate/249.html


Email: sales@mrtlab.com
Skype: sales@mrtlab.com
QQ:3292109557

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/