All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 14:55 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 73
Location: spain
I have a disk that could not read the plist.
You have these errors when reading the modules.

~0000.rpm : ..........................:OK
~0001.rpm : ..........................:OK
~0002.rpm : ..........................:OK
~0003.rpm : ..........................:Err
~0004.rpm : ..........................:OK
~0005.rpm : ..........................:OK
~0006.rpm : ..........................:Err
~0007.rpm : ..........................:OK
~0008.rpm : ..........................:Err
~0009.rpm : ..........................:OK
~000A.rpm : ..........................:Err
~000B.rpm : ..........................:Err
~000C.rpm : ..........................:Err
~000D.rpm : ..........................:OK
~000E.rpm : ..........................:Err
~000F.rpm : ..........................:OK
~0013.rpm : ..........................:OK
~0015.rpm : ..........................:OK
~0016.rpm : ..........................:OK
~0017.rpm : ..........................:OK
~0019.rpm : ..........................:OK
~001A.rpm : ..........................:OK
~001B.rpm : ..........................:OK
~001C.rpm : ..........................:OK
~001D.rpm : ..........................:OK
~001E.rpm : ..........................:OK
~001F.rpm : ..........................:Err
~002A.rpm : ..........................:OK
~002B.rpm : ..........................:Err
~0033.rpm : ..........................:Err
~0034.rpm : ..........................:Err
~0035.rpm : ..........................:OK
~003A.rpm : ..........................:OK

Is there any way to recover the PLIST?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 17:35 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 73
Location: spain
I have access to the list of sysfiles, but I can not read any sysfiles.

The overlay 05 that module or sysfile is?
The full overlay list can someone tell me?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 21:24 
Offline
User avatar

Joined: June 26th, 2014, 4:41
Posts: 55
Location: China
hi, you can contact our technical support:

Email: service@mrtlab.com
Skype: live:service_5567
QQ: 2693828612

Have a nice day!

_________________
MRT Lab - Your data recovery, our committed solution.
http://en.mrtlab.com/


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 23:14 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2528
Location: CDRLabs @ Chandigarh [ India ]
Hi,
This could be a fault of a weak head ,Or might be a actual physical bad sector in drive SA area .I would say try a headswap

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 9th, 2018, 1:56 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 73
Location: spain
Hello,
I have already changed my heads and do exactly the same.
What I do not know is if missing the module 03 and also the 2b + 0b, I will be able to recover the data?
PCB also changed just in case, although it was evident that it was not PCB problem.


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 9th, 2018, 11:22 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 73
Location: spain
When I turn on the disk I have access to cp and modules.
I do not have access to sysfiles. If I try to read sysfiles, I lose access to cp and modules.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group