All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 14:55 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
I have a disk that could not read the plist.
You have these errors when reading the modules.

~0000.rpm : ..........................:OK
~0001.rpm : ..........................:OK
~0002.rpm : ..........................:OK
~0003.rpm : ..........................:Err
~0004.rpm : ..........................:OK
~0005.rpm : ..........................:OK
~0006.rpm : ..........................:Err
~0007.rpm : ..........................:OK
~0008.rpm : ..........................:Err
~0009.rpm : ..........................:OK
~000A.rpm : ..........................:Err
~000B.rpm : ..........................:Err
~000C.rpm : ..........................:Err
~000D.rpm : ..........................:OK
~000E.rpm : ..........................:Err
~000F.rpm : ..........................:OK
~0013.rpm : ..........................:OK
~0015.rpm : ..........................:OK
~0016.rpm : ..........................:OK
~0017.rpm : ..........................:OK
~0019.rpm : ..........................:OK
~001A.rpm : ..........................:OK
~001B.rpm : ..........................:OK
~001C.rpm : ..........................:OK
~001D.rpm : ..........................:OK
~001E.rpm : ..........................:OK
~001F.rpm : ..........................:Err
~002A.rpm : ..........................:OK
~002B.rpm : ..........................:Err
~0033.rpm : ..........................:Err
~0034.rpm : ..........................:Err
~0035.rpm : ..........................:OK
~003A.rpm : ..........................:OK

Is there any way to recover the PLIST?

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 17:35 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
I have access to the list of sysfiles, but I can not read any sysfiles.

The overlay 05 that module or sysfile is?
The full overlay list can someone tell me?

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 21:24 
Offline
User avatar

Joined: June 26th, 2014, 4:41
Posts: 68
Location: China
hi, you can contact our technical support:

Email: service@mrtlab.com
Skype: live:service_5567
QQ: 2693828612

Have a nice day!

_________________
MRT Lab - Your data recovery, our committed solution.
http://en.mrtlab.com/


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 8th, 2018, 23:14 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
Hi,
This could be a fault of a weak head ,Or might be a actual physical bad sector in drive SA area .I would say try a headswap

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 9th, 2018, 1:56 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
Hello,
I have already changed my heads and do exactly the same.
What I do not know is if missing the module 03 and also the 2b + 0b, I will be able to recover the data?
PCB also changed just in case, although it was evident that it was not PCB problem.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: August 9th, 2018, 11:22 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
When I turn on the disk I have access to cp and modules.
I do not have access to sysfiles. If I try to read sysfiles, I lose access to cp and modules.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: September 30th, 2018, 14:26 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
I keep working on this hard drive with no results.
I have found several problems. I'm not sure about everything.
Error reading 0x03 and 0x2b, other modules totally written with "0x00", for example 0x01 and 0x02, leave the CAP unacquainted.
I have access to the list of SYSFiles, but I do not know where the MRTLAB is from.
Although I can not recover the information, I would like to be able to read the sysfiles.

Thank you.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: September 30th, 2018, 18:14 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
I opened the album after spending a lot of time with him.
I did not use a HEPA 100 sale.
Still with the same fault since I brought it.
In the upper plate I saw a small chopped, and I think that there is the whole problem.
I do not read 0x03 nor 0x2b, it always gives me the same reading failure in the SA, from the first day. I have a copy of the SA, but I can not make a copy of the SA tracks, to try to recostruy any of these modules.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: September 30th, 2018, 18:56 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
mhp666 wrote:
Best advice that i can provide now - do exactly as shown on your avatar picture.


I respect you for all your work that you do for others, but I do not share your opinion.
I'll keep trying, I get tens of hours dedicated and I'll keep trying.

If it were something important to pay for a laboratory and had a solution, it would already be solved.

Greetings.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: September 30th, 2018, 21:00 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
mhp666 wrote:
The overlay 05 that module or sysfile is?
The full overlay list can someone tell me?

https://forum.acelaboratory.com/viewtopic.php?f=254&t=8612

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: I HAVE ST3500418AS NOT PLIST
PostPosted: October 1st, 2018, 2:38 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
@fzabkar, thank you for the link.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group