All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: firmware needed for maxtor diamondmax plus 9 80 gb pata
PostPosted: September 28th, 2018, 10:34 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
Hi guys, I need firmware for pata hdd 80 gb calypso III Maxtor diamondmax plus 9 for MRT, thanks to all


Top
 Profile  
 
 Post subject: Re: firmware needed for maxtor diamondmax plus 9 80 gb pata
PostPosted: September 29th, 2018, 22:49 
Offline
User avatar

Joined: June 26th, 2014, 5:08
Posts: 135
Location: China
magnetepazzo wrote:
Hi guys, I need firmware for pata hdd 80 gb calypso III Maxtor diamondmax plus 9 for MRT, thanks to all


Hello, sir!
I have asked our tech support to help search FW resource.
However, considering that disk is very old ,it is hard to seek one.
Also you can search FW on other forum.
your FW version is 41BW0 and Y3 .
3 is for 3 heads.

_________________
MRT Express & Ultra, Professional Data Recovery Tool
Email & Skype: sales@mrtlab.com
Whatsup: +8615827155998


Top
 Profile  
 
 Post subject: Re: firmware needed for maxtor diamondmax plus 9 80 gb pata
PostPosted: October 1st, 2018, 10:33 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
Spildit wrote:
The big question now ...

If this post is the same drive as the other post - viewtopic.php?t=37390 it does look like the OP did already swap heads on the drive so ...

WHY THE HELL didn't he backup the firmware of the donnor drive first ?

If the drive is compatible enough for the heads to work on the damaged drive i would say that the first thing to do would be to backup the working drive firmware for later use ?

:shock: :shock: :shock:

you're running too much, I have two identical units with two different problems so I did two different posts. It seemed simple to understand :-) However, I thank you for the answer, mrt knows my problem because I had already talked to one of their technicians that's why he gave me that information. As far as backing up the other post you were talking about I have a different problem, of course I opened the unit safely and replaced the heads but the problem remains the same, irregular clicks. Unfortunately, this unit was subjected to a severe electric shock and some components exploded, I replaced the pcb and I recovered the ardent chip replacing it on the new pcb I had but the problem remains, so I thought it was a head problem and I proceeded to replace it, but nothing. The unit was identical to the one in question but was slightly more recent. Thanks again for your precious directions


Top
 Profile  
 
 Post subject: Re: firmware needed for maxtor diamondmax plus 9 80 gb pata
PostPosted: October 5th, 2018, 19:37 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1626
Location: Italy
You can search for PC3000 fw, they are compatible with mrt.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group