Switch to full style
Everything related to MRT tools
Post a reply

ST2000DL003 2TB Busy, No Spin, No Terminal

October 6th, 2018, 8:28

PCB without HDA gives ready state. (Tried with Donor PCB + Patient ROM)

PCB with HDA gives busy mode.

By entering Bootcode mode, Model & Serial Visible with 0.00 GB and no terminal access.


Any suggestions?

Re: ST2000DL003 2TB Busy, No Spin, No Terminal

October 6th, 2018, 9:01

You can start by posting the terminal output you're getting when the drive starts up.

Re: ST2000DL003 2TB Busy, No Spin, No Terminal

October 8th, 2018, 3:05

Terminal is total blank. No single output

Re: ST2000DL003 2TB Busy, No Spin, No Terminal

October 8th, 2018, 4:13

No Spin, No Terminal, Busy Status.

Not able to read system Files as well.
Attachments
123.PNG
122.PNG

Re: ST2000DL003 2TB Busy, No Spin, No Terminal

October 8th, 2018, 9:03

It enters directly into BootCode mode??
Is the ROM original?

Re: ST2000DL003 2TB Busy, No Spin, No Terminal

October 8th, 2018, 9:31

Yes ROM is original, Busy State so, only can enter bootcode mode.

Still Pending!!!
Post a reply