HDD GURU FORUMS
http://forum.hddguru.com/

ST2000DL003 2TB Busy, No Spin, No Terminal
http://forum.hddguru.com/viewtopic.php?f=28&t=37496
Page 1 of 1

Author:  shubhsinghal [ October 6th, 2018, 8:28 ]
Post subject:  ST2000DL003 2TB Busy, No Spin, No Terminal

PCB without HDA gives ready state. (Tried with Donor PCB + Patient ROM)

PCB with HDA gives busy mode.

By entering Bootcode mode, Model & Serial Visible with 0.00 GB and no terminal access.


Any suggestions?

Author:  data-medics [ October 6th, 2018, 9:01 ]
Post subject:  Re: ST2000DL003 2TB Busy, No Spin, No Terminal

You can start by posting the terminal output you're getting when the drive starts up.

Author:  shubhsinghal [ October 8th, 2018, 3:05 ]
Post subject:  Re: ST2000DL003 2TB Busy, No Spin, No Terminal

Terminal is total blank. No single output

Author:  shubhsinghal [ October 8th, 2018, 4:13 ]
Post subject:  Re: ST2000DL003 2TB Busy, No Spin, No Terminal

No Spin, No Terminal, Busy Status.

Not able to read system Files as well.

Attachments:
123.PNG
123.PNG [ 41.01 KiB | Viewed 8296 times ]
122.PNG
122.PNG [ 44.06 KiB | Viewed 8296 times ]

Author:  pclab [ October 8th, 2018, 9:03 ]
Post subject:  Re: ST2000DL003 2TB Busy, No Spin, No Terminal

It enters directly into BootCode mode??
Is the ROM original?

Author:  shubhsinghal [ October 8th, 2018, 9:31 ]
Post subject:  Re: ST2000DL003 2TB Busy, No Spin, No Terminal

Yes ROM is original, Busy State so, only can enter bootcode mode.

Still Pending!!!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/