December 28th, 2018, 18:40
December 28th, 2018, 19:05
HddDonorMarket wrote:USB Bridge PCB had electical problem. So drive not spinned.
December 28th, 2018, 19:15
December 29th, 2018, 20:19
Spildit wrote:HddDonorMarket wrote:Thanks .
But I have checked PCB , I found 10 resistor died. Open circuit. there was extremly small. No information how much ohms....
I would say .... buy a new bridge board as it might be easy rather than messing with the drive firmware to unlock it and extarct the data / decrypt ...
December 30th, 2018, 17:48
January 1st, 2019, 16:06
January 1st, 2019, 16:16
Spildit wrote:I would say .... buy a new bridge board as it might be easy rather than messing with the drive firmware to unlock it and extarct the data / decrypt ...
January 2nd, 2019, 5:29
data-medics wrote:Spildit wrote:I would say .... buy a new bridge board as it might be easy rather than messing with the drive firmware to unlock it and extarct the data / decrypt ...
Not if you have PC-3000. It takes less than 5 min to do this and be cloning/decrypting on the fly. Now, doing it with MRT is another much glitchier time wasting story.
Powered by phpBB © phpBB Group.