Switch to full style
Everything related to MRT tools
Post a reply

WD5000AZLX-00K4KA0 LDR FILE REQUERED

January 4th, 2019, 11:22

Technology mode key : ..........................: OK

RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 1
Head map : .....................................: 0
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xFE16
Control version : ..............................: 95B0

Zone allocation table : ........................: Err

ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 256 Kb
ROM version : ..................................: 45.BUF
ROM generation : ...............................: 45.BUF
Link table version : ...........................: K8.02
ROM Firmware version : .........................: 004500BU

ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 0x2
Heads number in use : ..........................: 0x1
heads map : ....................................: 1

SA Module Dir Loading...
Load SA Module dir : ...........................: Error, suggest to load from the file
Configuration reading : ........................: Err
Attachments
3.png

Re: WD5000AZLX-00K4KA0 LDR FILE REQUERED

January 6th, 2019, 15:27

Is the drive clicking and/or spinning down?

Re: WD5000AZLX-00K4KA0 LDR FILE REQUERED

January 9th, 2019, 11:49

Sping and No Clinking Sound

Re: WD5000AZLX-00K4KA0 LDR FILE REQUERED

January 12th, 2019, 3:14

I suggest you to work with ram operation, load module list from hard drive and use second, most of the time works for me.

Re: WD5000AZLX-00K4KA0 LDR FILE REQUERED

January 13th, 2019, 21:53

Get ROM Data : .................................: OK
Read Ram Data : ................................: Err
Can't make head test!
load 01...
Get 01 module from HDD : .......................: failed
Get module list from HDD : .....................: failed
Get module list from HDD : .....................: failed

Solve slow in RAM...
Get 02 module from RAM : .......................: failed

Re: WD5000AZLX-00K4KA0 LDR FILE REQUERED

January 14th, 2019, 11:23

first close systme area in rom
power off , on
open system area in RAM
work with ram operation, load module list from hard drive and use second,
open system area in Rom
power off , on
with this method I solve 90% of loader problem.

Re: WD5000AZLX-00K4KA0 LDR FILE REQUERED

February 1st, 2019, 10:10

siamak5561 wrote:first close systme area in rom
power off , on
open system area in RAM
work with ram operation, load module list from hard drive and use second,
open system area in Rom
power off , on
with this method I solve 90% of loader problem.
Attachments
99.jpg
Post a reply