Everything related to MRT tools
January 10th, 2019, 15:38
Hi everyone, I have problem for this disk and I do not find topic for solution, can anyone help?
Disk slows down for a long time to identify and does not go into terminal mode.
- Attachments
-
January 10th, 2019, 16:23
The hd rotates normally, but beeps twice as soon as it is turned on, it takes time to exit BSY mode and clicking Auto-identification goes to the wrong family with errors.
Thanks for the information, I'll be checking another hd from the same family about the behavior that will present.
- Attachments
-
January 10th, 2019, 18:18
Thank you, I will.
January 11th, 2019, 0:19
First You need to check Terminal log ..
January 11th, 2019, 2:41
“Beeps twice” is almost certainly physical issues, don’t mess with it any further!
January 11th, 2019, 2:42
applpp22 wrote:First You need to check Terminal log ..
Absolutely, no doubt it will show servo errors.
May 19th, 2019, 20:25
Disk is Port Locked.
You need to "firmware unlock" and "exchange commands".
Try to identify HDD again. Capacity should be detected normally.
Powered by phpBB © phpBB Group.