HDD GURU FORUMS http://forum.hddguru.com/ |
|
bad sector http://forum.hddguru.com/viewtopic.php?f=28&t=37950 |
Page 1 of 1 |
Author: | MindMergepk [ January 17th, 2019, 8:16 ] |
Post subject: | Re: bad sector |
need to change heads |
Author: | Abdul Rauf [ January 17th, 2019, 9:14 ] |
Post subject: | Re: bad sector |
can possible to recover data via MRT ? |
Author: | lcoughey [ January 17th, 2019, 10:42 ] |
Post subject: | Re: bad sector |
Both heads stop reading at the same point or does one head read further than the other? |
Author: | Abdul Rauf [ January 17th, 2019, 11:39 ] |
Post subject: | Re: bad sector |
lcoughey wrote: Both heads stop reading at the same point or does one head read further than the other? yes both heads stop reading same time. |
Author: | lcoughey [ January 17th, 2019, 18:53 ] |
Post subject: | Re: bad sector |
Then follow the advice of spildit |
Author: | MindMergepk [ January 18th, 2019, 5:25 ] |
Post subject: | Re: bad sector |
Abdul Rauf wrote: lcoughey wrote: Both heads stop reading at the same point or does one head read further than the other? yes both heads stop reading same time. I stand corrected, its definitely partial sector access, you probably messed up translators without considering the defects from NRGlist. |
Author: | Abdul Rauf [ January 18th, 2019, 11:50 ] |
Post subject: | Re: bad sector |
Spildit wrote: The PC-3000 have that "fork" method option to fix translator that can be very usefull on this sort of sittuation ... Even the Salvation Data HD Doctor for Seagate have an option to deal with this (that works like "Leonardo Method" - http://www.hddoracle.com/viewtopic.php?f=6&t=196 ). For MRT you can use the instructions provided by MRT staff on those mentioned MRT articles or if it fails you can check the entioned example of how to fix this using SeDiv and apply the same method to MRT..... Please do tell us if you do make progress with this recovery ! MRT Technical Staff see my case on tv next working day. |
Author: | HddDonorMarket [ January 29th, 2019, 10:11 ] |
Post subject: | Re: bad sector |
Try to start different LBA positions. Other options Remove fast copy option Go error handing part (pic3) Use hard reset and power reset . And use a skip block value like 100 or 100000 . Go timeout setting part (pic3) Increase default ms timeout numbers. It's very useful for weak heads/slow sectors . Select hard reset and power reset. Also u can use backward reading if you wish. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |