HDD GURU FORUMS http://forum.hddguru.com/ |
|
ST4000DM000-1F2168 CC54 Lombard can't read system files http://forum.hddguru.com/viewtopic.php?f=28&t=38490 |
Page 1 of 1 |
Author: | labtech [ June 10th, 2019, 5:18 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
High chance the drive's firmware architecture does not support writing sys files. |
Author: | gps31 [ June 10th, 2019, 5:51 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
can't read system files can't clear G-List nothing can do in this hdd |
Author: | Tomset [ June 10th, 2019, 6:43 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
Need Unlock ATA. |
Author: | gps31 [ June 10th, 2019, 9:28 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
Tomset wrote: Need Unlock ATA. let me know how to do that in latest release of MRT? i tried to unlock but no success |
Author: | unknown [ June 10th, 2019, 10:15 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
MRT utility says above Vol : Unsupported Try to read sysfiles manually. |
Author: | ccc [ June 11th, 2019, 2:16 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
unknown wrote: MRT utility says above Vol : Unsupported That message is about automatic voltage feature of the new MRT terminal....Does not matter what hdd is connected to the port. Rgds |
Author: | unknown [ June 11th, 2019, 2:45 ] |
Post subject: | Re: ST4000DM000-1F2168 CC54 Lombard can't read system files |
My mistake, sorry. Thanks for clarification. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |