June 16th, 2019, 17:22
June 16th, 2019, 17:56
Spildit wrote:This sounds to me a very risky plan ....
Replacing heads to start with could have been a better choice in my opinion ....
Did you apply the slow issue patch prior to start imaging ?
If the drive did image to a certain point with those heads and now it's not imaging again then the heads did die and most likely did take at least partially the platters with it !
At least replace heads if you do want to get more data ...
June 16th, 2019, 18:00
June 16th, 2019, 18:43
Spildit wrote:What does happen if you edit the SA regions in ROM and place values for copy 1 on copy 0 ?
June 17th, 2019, 0:17
HddDonorMarket wrote:Spildit wrote:What does happen if you edit the SA regions in ROM and place values for copy 1 on copy 0 ?
Don't know this mean
June 17th, 2019, 4:10
Spildit wrote:Try to change in ROM the region of SA - copy 0 - to same values of region of SA copy 1 ...
Maybe the drive will boot and ROM will look for SA copy 0 on the place where you have SA copy 1 ...
this mean,
there are two copies like copy 0 and copy 1. you can boot hdd using copy 1 without loading copy 0 data.
so you have to point starting address of copy 1, doing ROM edit.
June 18th, 2019, 4:45
Spildit wrote:DEMO of WDMarvel will NOT WRITE anything, just read. You need full version. But you should be able to do the same even with MRT ...
June 19th, 2019, 14:20
June 19th, 2019, 15:20
Jirbun wrote:Most wd drives I tried MRT did not support that (it was not available),in drives that seemingly supported when I change address,module 20b will change but even if I will write in good hdd completely wrong address hdd will get ready smoothly with full access so I don't know what exactly effect it did.
Powered by phpBB © phpBB Group.