All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: ST3000DM001
PostPosted: August 17th, 2019, 17:35 
Offline

Joined: July 31st, 2018, 12:26
Posts: 24
Location: norway
Anything to do here? It spins up, click twice and spins down It gets ID, firmware etc, but says the size is 3,86gb. Is this dead or is there something i can do?


Attachments:
sgt surface.jpg
sgt surface.jpg [ 186.06 KiB | Viewed 1468 times ]
Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 17th, 2019, 18:06 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 418
Location: spain
Hi.
I think it is a lost case.
Every time the needles pass through that area I think they will break.
Also if I'm not mistaken, the other surfaces of the HDD have the same scratch.

A greeting.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 18th, 2019, 5:29 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 784
Location: Pakistan
most likely gone, if customer is willing, partial recovery can be attempted...

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 18th, 2019, 8:00 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7520
Location: UK
MindMergepk wrote:
most likely gone, if customer is willing, partial recovery can be attempted...


Yes, maybe possible for partial but requires thorough investigation...

Not cheap :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 18th, 2019, 12:54 
Offline

Joined: July 31st, 2018, 12:26
Posts: 24
Location: norway
MindMergepk wrote:
most likely gone, if customer is willing, partial recovery can be attempted...


Ok, do you know how to partially recover? I have both mrt and pc3k available.


Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 18th, 2019, 12:59 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 417
Location: Kolding | Denmark
jonbang wrote:
MindMergepk wrote:
most likely gone, if customer is willing, partial recovery can be attempted...


Ok, do you know how to partially recover? I have both mrt and pc3k available.


In your case I would remove top head, do the necessary ROM modifications to get the drive to start without h5

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk


Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 18th, 2019, 13:01 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7520
Location: UK
digisupport wrote:
jonbang wrote:
MindMergepk wrote:
most likely gone, if customer is willing, partial recovery can be attempted...


Ok, do you know how to partially recover? I have both mrt and pc3k available.


In your case I would remove top head, do the necessary ROM modifications to get the drive to start without h5


After checking all heads for debris under the microscope of course! :-)

But in any case, it’s a cleanroom job.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: ST3000DM001
PostPosted: August 19th, 2019, 0:01 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 417
Location: Kolding | Denmark
pcimage wrote:
digisupport wrote:
jonbang wrote:
MindMergepk wrote:
most likely gone, if customer is willing, partial recovery can be attempted...


Ok, do you know how to partially recover? I have both mrt and pc3k available.


In your case I would remove top head, do the necessary ROM modifications to get the drive to start without h5


After checking all heads for debris under the microscope of course! :-)

But in any case, it’s a cleanroom job.


I take so many things for granted, thank you for completing my answer pcimage :)

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group