View topic - ST3000DM001

Main » Forums home » MRT Lab support forum

All times are UTC - 5 hours [ DST ]

ST3000DM001

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

jonbang

Post subject: ST3000DM001

Posted: August 17th, 2019, 17:35

Joined: July 31st, 2018, 12:26
Posts: 39
Location: norway

Anything to do here? It spins up, click twice and spins down It gets ID, firmware etc, but says the size is 3,86gb. Is this dead or is there something i can do?

Attachments:

sgt surface.jpg [ 186.06 KiB | Viewed 11390 times ]

Top

mhp666

Post subject: Re: ST3000DM001

Posted: August 17th, 2019, 18:06

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain

Hi.
I think it is a lost case.
Every time the needles pass through that area I think they will break.
Also if I'm not mistaken, the other surfaces of the HDD have the same scratch.

A greeting.

_________________
Is Earth an intelligent being?

Top

MindMergepk

Post subject: Re: ST3000DM001

Posted: August 18th, 2019, 5:29

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan

most likely gone, if customer is willing, partial recovery can be attempted...

_________________
Data Recovery Pakistan

Top

pcimage

Post subject: Re: ST3000DM001

Posted: August 18th, 2019, 8:00

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK

MindMergepk wrote:

most likely gone, if customer is willing, partial recovery can be attempted...

Yes, maybe possible for partial but requires thorough investigation...

Not cheap :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

jonbang

Post subject: Re: ST3000DM001

Posted: August 18th, 2019, 12:54

Joined: July 31st, 2018, 12:26
Posts: 39
Location: norway

MindMergepk wrote:

most likely gone, if customer is willing, partial recovery can be attempted...

Ok, do you know how to partially recover? I have both mrt and pc3k available.

Top

digisupport

Post subject: Re: ST3000DM001

Posted: August 18th, 2019, 12:59

Joined: March 6th, 2010, 3:46
Posts: 601
Location: Kolding | Denmark

jonbang wrote:

MindMergepk wrote:

most likely gone, if customer is willing, partial recovery can be attempted...

Ok, do you know how to partially recover? I have both mrt and pc3k available.

In your case I would remove top head, do the necessary ROM modifications to get the drive to start without h5

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk

Top

pcimage

Post subject: Re: ST3000DM001

Posted: August 18th, 2019, 13:01

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK

digisupport wrote:

jonbang wrote:

MindMergepk wrote:

most likely gone, if customer is willing, partial recovery can be attempted...

Ok, do you know how to partially recover? I have both mrt and pc3k available.

In your case I would remove top head, do the necessary ROM modifications to get the drive to start without h5

After checking all heads for debris under the microscope of course! :-)

But in any case, it’s a cleanroom job.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

digisupport

Post subject: Re: ST3000DM001

Posted: August 19th, 2019, 0:01

Joined: March 6th, 2010, 3:46
Posts: 601
Location: Kolding | Denmark

pcimage wrote:

digisupport wrote:

jonbang wrote:

MindMergepk wrote:

most likely gone, if customer is willing, partial recovery can be attempted...

Ok, do you know how to partially recover? I have both mrt and pc3k available.

In your case I would remove top head, do the necessary ROM modifications to get the drive to start without h5

After checking all heads for debris under the microscope of course! :-)

But in any case, it’s a cleanroom job.

I take so many things for granted, thank you for completing my answer pcimage

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » MRT Lab support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum