| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD40NMZW-11GX6S1 failed to ID http://forum.hddguru.com/viewtopic.php?f=28&t=39975 |
Page 1 of 1 |
| Author: | calk82 [ June 1st, 2020, 4:17 ] | ||
| Post subject: | WD40NMZW-11GX6S1 failed to ID | ||
Hi need some help here. I have this patient drive WD40NMZW-11GX6S1 which I swaped the USB PCB to SATA. After that I tried to load them into MRT utility by shortening TV9 and TV10. I couldn't manage to ID it. It failed and stuck in busy mode. Did I missed anything or is there another way to get this drive to ID in MRT? Patient USB PCB: 2060-800041-003- Rev P1 SATA PCB: 2060-800022-002 Rev P1
|
|||
| Author: | Marcofig [ November 8th, 2020, 23:18 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
Hi. Did you find a solution? I have the exact same case |
|
| Author: | sopon3720@gmail.com [ November 21st, 2020, 1:00 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
is this unlocked pcb ? with out unlock pcb you can't access SA. |
|
| Author: | northwind [ November 21st, 2020, 3:26 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
sopon3720@gmail.com wrote: is this unlocked pcb ? with out unlock pcb you can't access SA. I don't think this is true. It's Spyglass I. What is original problem of the drive? Why you want to short read channel? |
|
| Author: | Waelserag [ November 21st, 2020, 9:27 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
northwind wrote: sopon3720@gmail.com wrote: is this unlocked pcb ? with out unlock pcb you can't access SA. I don't think this is true. It's Spyglass I. What is original problem of the drive? Why you want to short read channel? sata pcb should work like charm as *northwind* mentioned to. what the customer told you ?! Btw it's sed lock drive did you try to block access to sa and make diagnoses ?! |
|
| Author: | pcimage [ November 21st, 2020, 13:01 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
sopon3720@gmail.com wrote: is this unlocked pcb ? with out unlock pcb you can't access SA. Not true. |
|
| Author: | DRUG [ November 25th, 2020, 16:18 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
pcimage wrote: sopon3720@gmail.com wrote: is this unlocked pcb ? with out unlock pcb you can't access SA. Not true. Could you explain the unlocked pcb bypass? |
|
| Author: | pcimage [ November 25th, 2020, 16:27 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
DRUG wrote: pcimage wrote: sopon3720@gmail.com wrote: is this unlocked pcb ? with out unlock pcb you can't access SA. Not true. Could you explain the unlocked pcb bypass? No such thing as “unlocked PCB” for Spyglass, it’s just a SATA one from a SATA version. I think mainly they come from WD wireless drives. |
|
| Author: | DRUG [ November 25th, 2020, 17:11 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
pcimage wrote: DRUG wrote: pcimage wrote: sopon3720@gmail.com wrote: is this unlocked pcb ? with out unlock pcb you can't access SA. Not true. Could you explain the unlocked pcb bypass? No such thing as “unlocked PCB” for Spyglass, it’s just a SATA one from a SATA version. I think mainly they come from WD wireless drives. Ahhh, my bad. Somehow my brain convinced me this was a Charger. Guess I'll have to buy 800065. Do you recomend a seller in particular? |
|
| Author: | northwind [ November 26th, 2020, 4:16 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
Donordrives, hddzone... or freelancers like eric lee or sunny. Be careful if you buy from alibaba etc, you can find good prices but you have no guarantee what you'll get. I got two of these Spyglass SATA PCBs and they both arrived dead. I managed to fix one of them but the other was FUBAR. Donordrives and hddzone will give you moneyback or replacement guarantee in case something goes wrong with the part. |
|
| Author: | sin [ December 6th, 2020, 18:01 ] |
| Post subject: | Re: WD40NMZW-11GX6S1 failed to ID |
regarding the whole locking and unlocking mechanism. Has that got something to do with the bootloader of the MCU. Example: STM32 Nucleo boards are supplied with factory bootloader that resides in some offset in the MCU itself considering June 2018RM0385 Rev 81/17241RM0385Reference manual. It would be quite a job to know the MCU chip id, find its memory map and investigate the BL. Also, do you think the unlocked boards are just having a BL patched to bypass security features. As a novice embedded guy,I am just guessing. let me know. -- |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|