Main » Forums home » Lounge

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
einstein9
 Post subject: Client tried to Unscrew, here is what ended up.
PostPosted: December 30th, 2012, 11:20 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
Really, sometimes we get some silly cases here with clients DIY
and this one is special, can you imagine client tried ONLY to remove the screws and this is what ended up with.

i dono from which school they graduated !!!

:rip:


Attachments:
IMG_0956-u3.jpg [1.07 MiB]
Not downloaded yet

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
dobrevjetser
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: December 30th, 2012, 15:05 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
I can imagine what would have happened if he tried to open up the disk :D

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
loki
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: December 30th, 2012, 18:18 
Offline

Joined: July 7th, 2010, 4:45
Posts: 924
Location: UK
Maybe another YouTube graduate :lol:

Loki
Top
 Profile  
 
einstein9
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: December 31st, 2012, 4:00 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
I guess for some reason, i don`t need this pcb, there is always alternatives
Case closed today with Data....

Thnx for the comments guys :wink:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
pclab
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: December 31st, 2012, 14:59 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal
What did the guy used?
A driller?? eheheheh

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
Touchclarity
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: January 1st, 2013, 3:36 
Offline
User avatar

Joined: July 21st, 2010, 5:03
Posts: 247
Location: Norfolk, UK
Looks like brute force coupled with a LOT of ignorance...... But hey, some people are like that..... if at first you don't succeed, pop a screwdriver under it and lever like hell...

The results can make life interesting..... :D

_________________
East Anglian Data Recovery Services
http://www.eadr.co.uk

"If it's your only copy - then it's not a backup!"
Top
 Profile  
 
einstein9
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: January 1st, 2013, 6:35 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
Touchclarity wrote:
Looks like brute force coupled with a LOT of ignorance...... But hey, some people are like that..... if at first you don't succeed, pop a screwdriver under it and lever like hell...

The results can make life interesting..... :D



Correction: If at 1st. you don`t succeed, DESTROY ALL THE EVIDENCE AND START OVER... :wink:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
raven4d
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: January 10th, 2013, 10:11 
Offline

Joined: August 16th, 2012, 4:57
Posts: 324
seems he was very careful when doing it
Top
 Profile  
 
Doomer
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: January 10th, 2013, 13:52 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3564
Location: Chicago
I guess unscrew is the second meaning of screw up :)

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
Russwinters
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: January 31st, 2013, 12:00 
Offline
User avatar

Joined: July 16th, 2008, 17:52
Posts: 489
Location: Long Beach, California
This is what happens when you don't have a T6 lying around and try it with a flat head that fits, and you don't know what your doing.


lol.
Top
 Profile  
 
ShaneWard
 Post subject: Re: Client tried to Unscrew, here is what ended up.
PostPosted: April 26th, 2013, 14:44 
Offline

Joined: July 2nd, 2011, 14:16
Posts: 453
Location: England
I think he couldn't be bothered to remove the screws and just wrench the board of the drive...
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Lounge

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group