Main » Forums home » Lounge

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 
  Previous topic | Next topic 
Author Message
pcimage
 Post subject: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 8:55 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Allegedly done by a local "PC expert guy" (Not UK) ...

Exactly as we received it.

So many issues it's almost laughable :-(


Attachments:
P1010406.jpg
P1010406.jpg [ 549.41 KiB | Viewed 19924 times ]
P1010405.jpg
P1010405.jpg [ 499.44 KiB | Viewed 19924 times ]

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
lcoughey
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 9:29 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
Guess there is no denying that they were messing with the platters, eh?

_________________
Luke
Recovery Force Data Recovery
Top
 Profile  
 
HaQue
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 9:42 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
but you can fix it, right ;)
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 9:43 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
pcimage wrote:
Allegedly done by a local "PC expert guy" (Not UK) ...

Exactly as we received it.

So many issues it's almost laughable :-(


Sean Sir ,
Damaged Seems To Be On Top Platter ,Might Be you Can Clean It ,Install New Heads And Try Out i Give it 50% Chance of Recovery And In Your Expert Hands Might Be 75%

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
pcimage
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 11:27 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Top platter also has radial "slipped screwdriver" scratches on it too :-(

Who knows the order and what way up the platters are meant to be, and what damage caused by the platters being pressed against each other.

I've backed out of this one!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
data-medics
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 12:16 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Amarbir wrote:
Sean Sir ,
Damaged Seems To Be On Top Platter ,Might Be you Can Clean It ,Install New Heads And Try Out i Give it 50% Chance of Recovery And In Your Expert Hands Might Be 75%


50% chance!!! are you crazy, I'd give that a 2% chance of getting so much as a single sector read. Anyone who's dumb enough to have messed around with the platters like that has also tried every DIY hack technique in the book. I'm sure it's already spent a night and a day in the freezer, been brutalized with Spinrite, left clicking for a couple of days, etc.

Quote $1000 + parts with no guarantees of getting any data back. That's what I would do.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
lcoughey
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 12:26 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
data-medics wrote:
Quote $1000 + parts with no guarantees of getting any data back. That's what I would do.

$1000? I'd be thinking an up front fee of $5000 for the attempt and an extra $5000 if we are able to recover anything at all. Then give them a list of labs who claim a 99% success rate.

_________________
Luke
Recovery Force Data Recovery
Top
 Profile  
 
dick
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 12:52 
Offline

Joined: January 8th, 2008, 5:21
Posts: 925
Location: uk
Not sure but are those blood stains I can see towards the bottom right? :shock:
Top
 Profile  
 
northwind
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 13:28 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3454
Location: Greece
They just "opened it, looked inside, and closed it", I presume...
This is totally FUBAR.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
pcimage
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 2nd, 2015, 16:05 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
dick wrote:
Not sure but are those blood stains I can see towards the bottom right? :shock:


No, they are marker pen marks.

Haven't checked this one, but the last two drives we had in from this dealer (who says they came in from another "data recovery company") had the same marks on the base along with similar marks on the platter edges, presumably a futile attempt at platter alignment.

One of the last ones had so much ink splodged on it that it had seeped onto the platter and had coloured the head sliders purple when looked at under a microscope! It was a Samsung HM100UI that shows an "unpack error" in terminal with no spin. Any half decent pro would recognise this fault and know that this guy almost certainly had no business switching the 3 platters to another chassis and getting fingerprints on all 6 surfaces :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
DRUG
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 3rd, 2015, 19:26 
Offline
User avatar

Joined: April 22nd, 2015, 20:32
Posts: 413
Location: Portugal
oh wow, that looks nasty.

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5
Instagram https://www.instagram.com/datarecovery_morde.pt/
Top
 Profile  
 
digitalferret
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 4th, 2015, 17:22 
Offline
User avatar

Joined: August 26th, 2012, 19:18
Posts: 293
Location: England
:shock:
How does that phrase begin again?

"There's a special place in hell....

_________________
Когда хочется кушать – съешь всё.
Голод не тётка!
Top
 Profile  
 
digisupport
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 14th, 2015, 9:21 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 601
Location: Kolding | Denmark
I hope you do not get to many jobs from that dealer Sean :shock:

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
pcimage
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 14th, 2015, 15:31 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
digisupport wrote:
I hope you do not get to many jobs from that dealer Sean :shock:


Unfortunately (for the clients) most of the jobs from this particular chap are butchered to some extent :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
jermy
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 14th, 2015, 18:46 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1387
Location: isreal
pcimage wrote:
Unfortunately (for the clients) most of the jobs from this particular chap are butchered to some extent :-(

i assume that the rest of them is become expensive :(
Top
 Profile  
 
pclab
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 17th, 2015, 7:50 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal
Got one today that was also opened by the client first.... :shock: :shock: :shock:
Filter full of debris and all over the chassis too.


Attachments:
WD 1.5.jpg
WD 1.5.jpg [ 1.6 MiB | Viewed 19499 times ]

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
HaQue
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 17th, 2015, 8:07 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
its dandruff from scratching their head trying to make sense of whats in there!
Top
 Profile  
 
pclab
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 17th, 2015, 15:03 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal
HaQue wrote:
its dandruff from scratching their head trying to make sense of whats in there!


:mrgreen: :mrgreen:

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
pcn
 Post subject: Re: When DIY goes wrong, yet again!
PostPosted: December 20th, 2015, 10:12 
Offline
User avatar

Joined: July 12th, 2014, 6:24
Posts: 91
Location: Berlin, Germany
Its not only DIY that goes wrong, I got two drives in from two different DR companies that claim to offer clean-room labs in Germany: "device has been handled under appropriate clean-room conditions".

Opened one drive today and there was a mess, not only limiter & filter missing but fingerprints & dust everywhere :evil: . And what was really sad, they did not even checked pcb contacts first - might have been the problem the drive had in the first place ...


Attachments:
cleanroom03.jpg
cleanroom03.jpg [ 8.39 KiB | Viewed 19379 times ]
cleanroom02.jpg
cleanroom02.jpg [ 72.08 KiB | Viewed 19379 times ]
cleanroom01.jpg
cleanroom01.jpg [ 84.89 KiB | Viewed 19379 times ]

_________________
030 Datenrettung Berlin GmbH (Germany)
HDD, SSD, NAS, RAID Datenrettung - 030-datenrettung.de
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 

Main » Forums home » Lounge

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group