All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Frikken lasers!
PostPosted: September 23rd, 2019, 7:12 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3409
Location: Adelaide, Australia
I was having some dinner and decided to have a look at how one might use a laser for cleaning monoliths, like all you billion $$ recovery companies...

I came across this one, and holy cow!

https://www.youtube.com/watch?v=ACGSzBXKONo

0:27 .. many moons ago I did some garnet blasting for work, and cleaning this type of stuff was not that easy.
1:07 .. ahh, I don't care, I am NOT doing that!
2:15 .. sprrt! I just choked on my dinner!


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 23rd, 2019, 8:32 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3339
Location: Massachusetts, USA
Those things are cool.
Wonder if it works on glass (platters)?
Yeah, it will be a while before those become affordable.

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 24th, 2019, 3:08 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2536
Location: Kuwait
some time ago when i saw one of the members here using it for Monolith cases i started thinking that i might need one
but when i saw those crazy numbers $$$ i changed my mind plus most of my clients will not pay much for flash cases...

clients here think: Why should i pay 200-300$ (min.) for such 10$ microsd lake of knowledge respect.
that's why we don`t do or accept much of those unless seriously willing to pay for it..

but its really Amazing what they presented on this video...

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 24th, 2019, 4:59 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3409
Location: Adelaide, Australia
https://www.youtube.com/watch?v=4aGrvZFdkSw

so nice. I wonder if poor souls like me can get these stripped from by some service. Obviously not for low volume, but I have over 100 for research / pinout discovery that I really would love to get lasered!


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 24th, 2019, 5:10 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2536
Location: Kuwait
HaQue wrote:
https://www.youtube.com/watch?v=4aGrvZFdkSw

so nice. I wonder if poor souls like me can get these stripped from by some service. Obviously not for low volume, but I have over 100 for research / pinout discovery that I really would love to get lasered!


this is the one i was referring to

If you really doing good with Monolith you should get one, but if not much then i suggest the old fashion way works

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 24th, 2019, 6:42 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 72
Location: Poland
Like you write - it's great when you make a lot but also there are one big adventage of using laser for coating remove too. In case there are cutted tracks or heavily demaged part of monolith you cannot use fiber glass or sand paper... here comes with help laser. These are rare cases but trully speaking we mostly recive "rare" cases.

P.S
We show on this video that we lasered whole monolith microSD but novadays we are using it only to remove coating from places where technological NAND pinout is located.

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 24th, 2019, 19:44 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 11808
Location: Australia
HaQue wrote:
https://www.youtube.com/watch?v=4aGrvZFdkSw

so nice. I wonder if poor souls like me can get these stripped from by some service. Obviously not for low volume, but I have over 100 for research / pinout discovery that I really would love to get lasered!

I found these guys:

https://www.steamatic.com.au/steamatic/

Unit 5/49 Naweena Road, Regency Park, SA 5010

adelaide at steamatic dot com dot au

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 25th, 2019, 3:00 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3409
Location: Adelaide, Australia
Thank you franc, literally 8 minutes from me :)

I will look into it and post results.

Again, Thanks.


Top
 Profile  
 
 Post subject: Re: Frikken lasers!
PostPosted: September 25th, 2019, 3:27 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 11808
Location: Australia
This is a better URL:
https://www.steamatic.com.au/plc/
https://www.steamatic.com.au/locations/adelaide/

I used to do contracting work at the nearby college about 30 years ago.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group