And here is the Changelog in the same manner:
4.46 from 12 Aug., 2008
- The button of obtaining a passport is divided into two separate (normal and
Extended a passport). For your convenience, and there are screws that crash
of extra commands.
- The HPA added checkbox determines whether the call
Advanced passport after changing HPA.
- Fixed a heap of bugs in the passport. In particular, do not reset
some variables. Added definition modes Single Word
DMA and Multi Word DMA.
- Fixed bug in which the program attempted to autocratically
climb to screw in the absence of support LBA (which, she tried to climb
in sector number -1).
- Made auto-install Jackdaws "48 bit", if the amount above 128 GB HDD.
- Fixed bug. If you have a jackdaw "Only non destr func" and start
seek'a, the ban on record was shot after stopping seek'a.
- Fixed bug. Have not yet received a passport through the ports - the slider AAM can
was moving. This resulted in an error Interface after the Change, if the screw
was not connected. Prohibited items AAM to obtain a passport.
- Added check of the buffer and the interface HDD in the passport.
- Added stipulated the number of processors, is given in the log at startup.
- Fixed small bug in the ATA. When DRQ raised earlier program issued
"Waiting of readiness ..." and nothing happened. Now the phrase is given on
unwillingness of the device.
- Added indicator LEDs, read / write to disk.
- Width Khint increased to 400 points.
- The new SMART-attributes 184.187, relating to the defects identified
- Expand the field End LBA in the partition table that it was placed on the screw 1Tb;
- When setting the cursor to the line of dialogue - from rip out the number, and copied
to the clipboard, right-click.
- Select the port during the test is now blocked.
- Automatically check box Sound, if you start the program after an hour
night. At 7 am he was again restored if prior to that was.
- If you do not find ini file on startup, the log is given a warning
Resetting the settings to default.
- Changed the algorithm initialization and verification of readiness of the screw. If the screw in the DRQ
before receiving a passport - the program advises to press reset. If stot jackdaw
reset +, a reset is sent automatically each time you obtain a passport.
- During the scan is checked and another flag WRFT. Together with the DRSC, DRDY
This check determines diskonnekt device.
- Removed yet another bug with флешками.
- Team E2 (sleep) is replaced by E0.
- Integer Overflow removed when connecting fleshek, giving incorrect
- Added support for unofficial payments PC3000 UDMA: fixed detector
alt-port on the board, added to work with the second channel test
- Fixed bug: scan reading and writing through the ports - stayed at the
processors with variable clock frequency;
- For multi-core computer added a new type of timer - GTC (Setup).
It eliminates the problem of spontaneous stoppage of the process and
inappropriate behavior of the counters. However, it is less clear;
- The help function has a detailed description of timers.
- Slightly increased the list of manufacturers of controllers;
- Percentage of implementation is now displayed on the Task Manager button;
- Added definition of the frequency of CPU each time again when you run any test
(daw Always ajusting RDTSC ...). This was made possible accurate
work program on computers with a variable clock rate;
- Disposed of flickering graphics at the time of scan to run off the card
(manifested in the weak CPU);
- Fixed bug, which does not appear SMART ATA hard drive
in the SCSI-passport;
- The passport is inserted definition NCQ, PEC, generation SATA;
- Added-dependent SMART disk drives for IBM / HITACHI;
- Added support for super-SMART for IBM / HITACHI ( "factory" attributes);
- Fixed bug, which is not shown the status of security erase
- Added display of the limit of temperatures that have ever experienced a screw.
(For those of screws, which are supported);
- Added automatic switching to the Standard tab in the selection of API;
- When switching to the API panel with "lights" register now disappears for
unnecessary. Also, no form of display registers;
- An indicator of the showing activity of the objectives of the program;
- Made auto-withdrawal from the recording after the erasure;
- If you're copying to clipboard tables SMART - added the name of the disc, and SN;
- Added a serial number and version firmvari through the API, for the USB / SCSI
- Made extinguishing bulbs with screw in diskonnekte PIO;
- Removed bug. Scan after reset timed to go forward and not waiting for preparedness HDD;
- Removed bug. Do not close the handler when viewing table through API;
- Removed bug. When you open the disc with a defect in the HEX editor, in the box LAV
- Made the preservation MBR (sector 0) disk when you view the partition table. At each
- In the API now can neither see the partition table, nor to change its
until not obtain a passport. This is done to avoid situations such as
"changed the fact that I do not know";
- Slightly improved jumping to scan, in the PIO;
4.4 - intermediate version with support for Remote HDD - HDD work with remote
via the Internet using PIO. Distributed only in a closed group.
4.3 - a significant reworking and complexity of the whole complex, which
freeware-version again "beta".
- Enter a few elements of protection from negligence, namely:
* Automatic correction of wrongly imposed limits of the range of LBA;
* Warning when trying to erase the system disk in the API;
* Warning before erasing the disk, if the hard drive has been replaced;
* When switching PIO-API recording automatically switch
* The port number and type of channel tested HDD launched atop bookmarks
in the upper right corner;
- Working with logical drives through the API has become easier. The list is displayed
followed by physical tab 'Standard'. The option adjustable,
in particular, can be turned off with disks (under the 'Setup');
- Now copy-paste work in the fields of writing LBA seek. There are buttons
reset values LBA;
- In Seek added to counter the number of positioning;
- From the graphics removed manually switch factor, instead it is introduced
automatic scaling depending on the speed of testing
storage (2 to 980 Mb / s, which theoretically allows you to test
as high-speed RAID arrays, and diskettes);
- Disposed of flickering graphics at the expense of double-buffering;
- When EraseBlock logs recorded in a range of sectors erased block;
- Added ability to copy to the clipboard, not only the entire passport,
but also his own line;
- The panel STANDARD, SMART, TESTS added splitter (separating)
to change the size of the windows as smoothly and at maximum size
- Added the ability to copy to the clipboard of the sections;
- A bit better view logs by reducing the field time, the latter
row is now highlighted in blue;
- The SMART added showing the temperature in Fahrenheit;
- The SMART scale "health" HDD changes color depending on the value;
- The color scheme of the interface is determined by settings in Windows, and not
has a fixed color as before;
- Added icons, icons in the menu;
- For the aesthetes added ability to switch rounded framework for
classical direct (setup);
- Added the function keys F1 (Help), F2 (passport), F3 (reset HDD
mode PIO), F4 (start / stop scan the surface), F5 (start / stop
positioning test), F9 (a SMART);
Error correction, improvements:
- Fixed the "ideological error, the remainder of the DOS version. It was
that "the last LBA" screw was equal to the number (actually - 1
less, because the sector numbering starts with 0), and all tests have ignored this
non-existent address, the same could not enter the same values boundaries;
- To lift the ban on entering the same values at the beginning and end LBA
- Eliminated output abroad Start LBA in the reverse scan;
- Fixed problem with unclosed handler disk mode scan through the API;
- The program is adapted to an error in the microcode HDD Seagate U5, as a result of
that these memories return incorrect CHS parameters;
- Fixed bug, which when you switch the method of processing defects
during the scan surface is not adjusted timeout (although visually it
- For storage of small volumes of the size shown in kilobytes (API);
- Fixed a bug that leads to an incorrect number in LBA
HPA window with a passport on a disc that has the number of LBA
far (> 1000 times) less than the real;
- The speed of erasing mode API slightly increased (5-10%);
- Slightly reduced the load on the CPU when drawing maps;
- Fix "brake" when scrolling the map, when the scan is stopped;
- Fixed bug with wrong line conversion "x G" (where X - number) when
writing instead of LBA;
- Fixed bug with wrong display of flags SATA/LBA48 Virtual
and USB drives;
- Fixed a result that did not choose a folder with logs
when you open the file, the passport and SMART;
- Fixed minor error in the synchronization switches;
- Fixed bug, which is sent to reset the screw through the ports in the
"Quick Navigation" at the time of scan through the API;
- Fixed minor bugs and a pile in some places, optimized code;
Adding new features:
- Made possible to verify the reliability of recorded data in the API,
It was the name of Data Distortion Detect (distortion control
data, abbreviated DDD or 3D). It works as follows: if
record set checkbox "DDD Enable", in a special unit will be recorded
control code, which then checks the reading. When discrepancies least
one bit will be given an error "data distortion!";
- Added the ability to renumber all sectors, with removal through the API.
Also in each sector adds date and time of erasing;
- Added a number memorized in the device API INI-file;
- Display Room LBA when pointing the cursor to scan the card now works
and in reverse;
- If you tested the drive is a removable device, it is
that its low speed and timing are set higher than for HDD;
- When you right-click on the map scan now poyavlyaetya menu,
proposed to appoint the selected boundary block range scanning;
- The scan through the API added recognition errors UNCR, IDNF, ABRT, Write
protected (special to Flash), AMNF (floppy disk) and a few others;
- Enter control readiness HDD before adjusting AAM, thereby obviating
vain expectation, and the associated "zalipaniya" slider AAM;
- Added the ability to feed an audio signal after the Security
- Added an attempt to stop the shaft HDD, CD SCSI command through the API. Now
should work for SCSI and SATA drives via ext. controllers;
- API Verify in the scan and is now Seek'e SCSI command Verify,
thus it is now possible to test the USB / FireWire drives on
nominal speed, without limitation, the interface;
- Added forced to switch to the SCSI command, obtain a passport
due to glitches drivers SiI3112 SATA controller in the processing of ATA-commands;
- Changed the logic for determining the amount of drives through the API. Now
first tries to get the LBA size SCSI command if you do not work --
checked the disk geometry of other teams, and to calculate the size of CHS.
* CHS option you can disable daw "Don't get drive type", because I do not
liked her work in the 'Apple' FireWire HDD Box;
- Added summary in the form of an external HTML, due to F1. You can
replenish its own;
- Added disk viewer / editor, the panel is given to the Advanced
- Added one more item on the menu, scan the surface of the end. It disables the ATX
computer with the correct completion of Windows;
- Industries with remape now marked recurring signature "REMAP !!!",
not filled by debris, as before.
4.2 - appendix of the discs through the Win API. First Steps with API.
- Added work with physical disks through the Windows API - in
Class Windows NT/2000/XP. Supported
IDE, SATA, USB, FireWire, Flash, SCSI drives and virtual disks
BestCrypt. It also supports CD, FDD, etc. "logical" (but still
realized uncomfortable). SMART has been working only on IDE and SATA HDD;
Through the API has been possible to test the system hard drive;
- Fixed bug, which is displayed at double speed
- Fixed a bug that leads to abnormal termination of program
SMART disk with a damaged table;
- Fixed bug leading to abnormal termination when adjusting for AAM
4.1 - Removal of the main drawbacks.
- Fixed a bug that resulted in viable program for
Italian version of Windows;
- Changed the type of tax, to be compatible with the format in other countries
(especially distinguished Albania and Honduras - their time is written in a
terrible, as such 2:00:09 PD); also had to edit and format
- Added identification of Windows Vista;
- Fixed minor bugs in the code and interface;
- Changed element to adjust the timeout in the scan surface, added
the endless waiting, which is allowed to switch the power
HDD test without stopping the scan;
- The full version added PIO-32 copying of sectors in the file with a "long
reading and pass the defects (for free until the disabled);
4.0 - Getting Started.
The first version for Windows. Support for the work only through the ports.