All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Can I reset S.M.A.R.T. UltraDMA CRC Error Count ?
PostPosted: February 7th, 2020, 7:20 
Offline

Joined: February 7th, 2020, 7:12
Posts: 1
Location: Belgium
Hi,

I have a HGST HDS724040ALE640 disk which has been in a desktop server for a while but at one point it stopped working suddenly.
After investigation it turned out the sata connector was broken and caused the issue. The cable was replace and everything worked flawlessly since.

Now I want to use this disk in a Dell R720xd server but the led is flashing red and I started to investigate. It's caused by a bad S.M.A.R.T. health report.

Apparently the "UltraDMA CRC Error Count" is extremely high and I'm pretty sure this is caused by the bad sata connector in the past. But the disk itself is fine. I even did a 10x long self test in a row (using the "smartctl -t long /dev/sda" command) and all tests finished without any error at all.

Is it possible to reset the S.M.A.R.T. UltraDMA CRC Error Count value of this disk ?
I don't have expensive equipement for disk repair but maybe this can be done in software?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group