Hi,
I have baught a USB to Serial converter and has Seagate & WD firmware . But still couldn't find a working firmware to Toshiba & Hitachi HDD's . Please help me to find solution..

Thanks
CharithaJ

The converter stores firmware? Never heard of that before.
What are tryint to accomplish exactly?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts

HI

Highly appreciate your feed back, It is actually the device which is connect to Rx,Tx & Ground jumpers of the hard disk & connect the device into usb port and working F3 commands for Seagate.

Hi,
Thanks you very much for your information. Highly appreciate.
Thanks

@Spildit, PC3K allows you access to WD drives to ROM, SA and user data using TTL.

sorry, my mistake, I thought you meant it can't be done

Actually even PC-3000 can't read WD SA via TTL, rather it uses vendor specific ATA commands through SATA. Only read/writes ROM using TTL in boot ROM code mode.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

you have a PC3K ?
try it (WDC Marvell USB/COM utility)
hint: I already tried

Hi,

Thanks for the all information. As a beginner im looking for firmware app + device at lower cost than MRT or PC3K. Can any one give me an indication where can I buy?

Thanks
Charitha