Hi all,
I tried the HDD low level format tool and HDD RAW copy tool a week ago and it worked well.
Yesterday i tried again and get the following error with all usb thumb drives :
7-4-2017 08:23:07 * * * * * WARNING!!! * * * * *
7-4-2017 08:23:07 DURING THE LOW LEVEL FORMAT PROCESS
7-4-2017 08:23:07 ALL DATA WILL BE FULLY and IRREVERSIBLY ERASED!
7-4-2017 08:23:15
7-4-2017 08:23:15 =================================================
7-4-2017 08:23:15 HDD Low Level Format Tool 4.40;
http://hddguru.com7-4-2017 08:23:15 Low level format: [8] Kingston DataTraveler 3.0 PMAP [31,44 GB] (61415424 512-byte sectors)
7-4-2017 08:23:15 Device capacity: 61,415,424 sectors
7-4-2017 08:23:15 Locking device...
7-4-2017 08:23:15 Formatting...
7-4-2017 08:23:15 Format Error occurred at offset 0: 5
7-4-2017 08:23:15 Format Error occurred at offset 65,536: 5
.
.
7-4-2017 08:23:18 Format Error occurred at offset 31,406,882,816: 5
7-4-2017 08:23:18 Format Error occurred at offset 31,440,437,248: 5
7-4-2017 08:23:18 Average speed: 12052,4 MB/s
7-4-2017 08:23:18 Low-level format is complete.
7-4-2017 08:23:18
7-4-2017 08:23:18 Remember to create new partitions.
I did not copy all because it's a very long list.
This is the error from HDD RAW copy :
7-4-2017 08:48:05
7-4-2017 08:48:05 HDD Raw Copy Tool 1.10;
http://hddguru.com7-4-2017 08:48:05
7-4-2017 08:48:05 * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS
7-4-2017 08:48:05 ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
7-4-2017 08:48:05
7-4-2017 08:48:05 Source: [0] IMAGE of USB DISK 3.0 PMAP [15,51 GB]
7-4-2017 08:48:05 Target: [8] Kingston DataTraveler 3.0 PMAP [31,44 GB]
7-4-2017 08:48:12 Locking device...
7-4-2017 08:48:12 Copying...
7-4-2017 08:48:12 Write Error occurred at offset 0 (5)
7-4-2017 08:48:12 Cannot write to target, aborting...
7-4-2017 08:48:12 Average speed:
7-4-2017 08:48:12 Operation terminated at offset 0 LBA 0
This happens with all my thumb drives.
It looks lik it's not accessible for the programms.
In windows i can put files on the drive and format as normal.
Please anybody an answer for my problem ?
Thanks in Advance !
With kind regards.
Ries