All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Three Drives Dead During flash with vendor sofware
PostPosted: October 1st, 2017, 12:18 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
i am new to hdd . i got vendor software to flash firmware.
after flash done , during reset drive goes dead.
plz any one help.


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 1st, 2017, 12:30 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
is naming the software is allow here ,


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 1st, 2017, 12:33 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
wd5000aads , wd2500aajs during flash
erasing flash
writing flash
writing flash done , ok 192km
reseting drive
drive dead while resitng .
am i doing something wrong sir.
or should i put any jumper on drive for fw.


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 1st, 2017, 12:46 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
yes sir . i was trying to refurb the drive . i do exacttly as i seen videos on your forum.
now drives dont power up at all.
i dont have wd marvell, and sediv ,
i have orignal roms backup of drives ,
and pcb have external roms.
i dont have external rom programer.
what should i do now .


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 1st, 2017, 12:51 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
ok sir thank you very much , i will read those post and then report back to you.
plz sir unban aswell on your forum.


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 2nd, 2017, 16:42 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
hi sir i need your help.
do you use trex .
i want to know how to edit rom path in .trx files. so trex will find the rom for hdd automaticly.


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 2nd, 2017, 16:44 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
i got a folder named 3.5 of all roms but i dont know where to put them. and how to set there path.


Top
 Profile  
 
 Post subject: Re: Three Drives Dead During flash with vendor sofware
PostPosted: October 2nd, 2017, 16:45 
Offline

Joined: September 27th, 2017, 17:57
Posts: 21
Location: pakistan
because i changed the rom chip from other pcb and want to reflash it with auto trex but i dont know where to put that folder of roms.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group