HDD GURU FORUMS http://forum.hddguru.com/ |
|
500GB hard drive showing around 32GB - Seatools for DOS? http://forum.hddguru.com/viewtopic.php?f=7&t=36167 |
Page 1 of 1 |
Author: | dj44 [ December 9th, 2017, 12:45 ] |
Post subject: | 500GB hard drive showing around 32GB - Seatools for DOS? |
I have a Dell laptop that I got about a year ago with a Seagate ST9500420ASG 500GB 7200rmp hard drive in it. But it has always only showed - in the Bios and every other Windows 10, and other software that it is only 33GB capacity. I first assumed that this was because it was formatted as FAT or FAT32 but the drive is listed as NTFS. I have dealt with it this way for a while, but gradually over the year, the windows updates have used up all the space on the disk and I have now had to delete literally everything else and still cannot get the latest huge Windows 10 update. So I was just about ready to give up and reformat the entire disk and switch to Linux - after everyone I asked provided either solutions that have been tried and failed, or were not applicable to my problem. Then the other day, after hours of searching, I found out about SEATOOLS for DOS and the "set capacity to native max" option. I already had SEATOOLS for windows installed and it - like everything else listed the drive as 33gb. My question is - is it worth downloading, and trying this SEATOOLS for DOS application to try and fix this problem and if so - will it cause any or all loss of data (in my case that would mean my Windows 10 OS which I won't be able to get back). Has anyone had the problem I am describing and had good results with this? I am here after having exhausted just about every other option and sure didn't want to have to create yet another username and password for yet another forum, but I thought it was worth a shot asking here. Thanks for any help or suggestions. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |