All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 30 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: WDR pro 3.0
PostPosted: March 16th, 2013, 9:20 
Offline

Joined: December 9th, 2010, 2:59
Posts: 216
Location: kolkata
Is any one using this software for "ROM REGENERATION"? What is your experience?


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 17th, 2013, 9:07 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
- It can read the ROM from a working PCB.
- It can Write it back to a working PCB.
- It can check for Modules of SA.
- It can "Repair" the ROM modules on PCB flash ROM by reading the Modules from SA.

You can select ROM size too - 128K, 192K, 256K ROM size.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 17th, 2013, 11:35 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
Make sure that the drive is connected to the SATA port and don't try to use the USB option. I don't know if it works or not (USB option) but at any rate USB is bad for data recovery, just use normal SATA.

Open WDR PRO 3.0 or later version.

- Detect the PORT that you are going to use for WDR, by going to "Options", "Port", "Custom" and "Scan PCI". Do that with a good drive connected to the PORT that you want to use.

Now if you have a BAD PCB and you want to Read ROM from it, run WD Pro and plug the PCB to the port you chose. You can verify that you have plugged it on the right port and that the right port is selected by looking at Status Register.

Go to HDD and select Royl or Marvell acording to your MCU.

Click on the "Flash" Icon or right click on the window OR go to "Service" "Flash Operations".

(you might have to wait 30 sec. for the PCB to get ready when you power it up).

On the flash tab chose READ and DUMP the contents to a file.

Now, stop WDR, plug the PCB that you want to program and do the same but instead of "READ" you should "Write" the file that you saved on it.

Donor PCB will then be re-flashed with initial damaged drive ROM, content.


Attachments:
WDR.jpg
WDR.jpg [ 25.79 KiB | Viewed 25283 times ]

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.
Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 17th, 2013, 12:23 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
If you have a compatible PCB with it's own ROM you should be able to place that compatible PCB on the damaged drive, run WDR and chose the option "Repair" to flash the ROM using a copy on the SA modules. I've never done that and i don't have any WD drive here to test, but it's suposed to work.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 17th, 2013, 19:43 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
WDR 3.0 Very cooollllll Software.
Spildit likes it alot !

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 18th, 2013, 5:44 
Offline

Joined: March 8th, 2013, 11:39
Posts: 6
Location: Saturn
WDR pro v6.0 is cooler :D


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 18th, 2013, 11:58 
Offline

Joined: December 9th, 2010, 2:59
Posts: 216
Location: kolkata
why u are kidding man......
we are only 3 and u r 6, just double........


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 18th, 2013, 13:23 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
Let's not forget that this is software that is.... Pirated.
V.2 is TREX with diode script.
V.3 and above is HRT interface with Trex code and salvation data and even V.2 have salvation data manual edited...
Then Union of china sold those tools with dongle....
Guess what, someone cracked them and posted them on a russian forum... And now people are selling them.... In private !

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 18th, 2013, 13:49 
Offline

Joined: January 8th, 2008, 5:21
Posts: 824
Location: uk
Quote:
Guess what, someone cracked them and posted them on a russian forum

Yes ironic isn't it?

WDR 6...........well that is the cracked version of WDR 5.3 cough cough :mrgreen: and no I don't have it!


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 18th, 2013, 15:04 
Offline

Joined: January 8th, 2008, 5:21
Posts: 824
Location: uk
WDMarvel23 http://rghost.net/43013692
As far as I know this one is legitimately for free and is in continuous development and can be followed on the Russian forums. If you have any comments on this one it would be best start new thread.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 19th, 2013, 12:02 
Offline

Joined: December 9th, 2010, 2:59
Posts: 216
Location: kolkata
So, Whether wdr 6.0 actually exists or not? Is it available in russian sites or not?


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 19th, 2013, 12:06 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
It exists... But it's "pirate" ...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 20th, 2013, 10:34 
Offline

Joined: December 9th, 2010, 2:59
Posts: 216
Location: kolkata
But then it should be available in the www web.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: March 20th, 2013, 11:43 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
longlife wrote:
But then it should be available in the www web.


no, it shouldn't.
Just because "it exists" it doesn't mean that you can just browse the net and get it for free.
I don't know about you be i like to eat everyday and to buy stuff and also have to take care of my wife. If i were doing data recovery for a living i wouldn't like for my tools to be available for free on any corner of the net.
When you want a new car or a new computer, you go and you buy one, right ?
So if you really want to lear dr buy pc-3000 legal one and start from there.
This sort of tools are supposed to be used by people who know what they are doing with them, and come without help. If you are new to the field of data recovery there you have lesson number one. Not all in life is free...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: April 2nd, 2013, 17:18 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
Does it looks familiar ?

Attached photo is a screen capture of the older version of the BVG group HRT (Hard Drive Repair Tool).

http://www.bvg-group.ru/index_eng.php

bvg group doesn't have any link to "Union of China" .....

The makers of WDR just "borrow" the User Interface from HRT ......
And the code from TREX .... And Salvation Data (at least the manuals....).....

:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:


Attachments:
1.jpg
1.jpg [ 53.61 KiB | Viewed 24874 times ]

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.
Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: April 16th, 2013, 2:21 
Offline

Joined: March 1st, 2010, 3:49
Posts: 12
Location: cairo
pls i want wd caviar program i have marvel one but not work on caviar hdd
i have wd pro 3 works only on marvel hdd and i have some caviar hdds please if any one have it please send it to me
thanks all


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: April 16th, 2013, 3:13 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
ashrafatteya2005 wrote:
pls i want wd caviar program i have marvel one but not work on caviar hdd
i have wd pro 3 works only on marvel hdd and i have some caviar hdds please if any one have it please send it to me
thanks all


I have it but it's a HARDWARE solution like pc3k. You need the PCI CARD with licence for it to work. That caviar app is part of HRT and will not work without HRT pci card !

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: April 16th, 2013, 14:56 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
Some extra pictures of OLD HRT (Maxtor, IBM, WD screen captures) ....
Enjoy !


Attachments:
3.jpg
3.jpg [ 30.92 KiB | Viewed 24663 times ]
2.jpg
2.jpg [ 34.43 KiB | Viewed 24663 times ]
1.jpg
1.jpg [ 36.49 KiB | Viewed 24663 times ]

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.
Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: May 20th, 2013, 1:15 
Offline

Joined: May 17th, 2013, 1:28
Posts: 13
Location: United States
That link - download is blocked - WDMarvel23 http://rghost.net/43013692

Anyone know a good link where to download the WDR PRO 3.0 or higher version?

thank you!!


Top
 Profile  
 
 Post subject: Re: WDR pro 3.0
PostPosted: May 20th, 2013, 16:37 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9053
Location: Portugal
WDMarvel23 IS NOT WDR.

WDMarvel23 is a diferent tool (Russian) while WDR is chinese "pirated" tool based on TREX and HRT.

WDR DEMO :

http://malthus.zapto.org/viewtopic.php?f=32&t=33

WDR Full is not FREEWARE and it's PIRATED.

WDMarvel23 in russian could be downloaded from that link that now is down and i don't have it. Maybe someone who download it when the site was still up can send you a copy ?

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group