All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: problem with HDD Raw Copy Tool 1.10
PostPosted: January 19th, 2018, 14:35 
Offline

Joined: January 19th, 2018, 14:24
Posts: 1
Location: chennai
please check the log below

1/19/2018 12:36:38 PM
1/19/2018 12:36:38 PM * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS
1/19/2018 12:36:38 PM ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
1/19/2018 12:36:38 PM
1/19/2018 12:36:38 PM Source: [0] RAW ethos-1.2.7.iso [7860.5 MB]
1/19/2018 12:36:38 PM Target: [0] HP SSD S700 120GB Q0616B1 [120.03 GB]
1/19/2018 12:36:43 PM Locking device...
1/19/2018 12:36:43 PM Copying...
1/19/2018 12:39:23 PM Write Error occurred at offset 7,851,671,552 (87)
1/19/2018 12:39:23 PM Cannot write to target, aborting...
1/19/2018 12:39:23 PM Average speed: 49.0 MB/s
1/19/2018 12:39:23 PM Operation terminated at offset 7,851,671,552 LBA 15,335,296


i have tried both portable and setup version , both results in the same thing , it reaches 100% and then stops
while googling i sow that error means the source is larger than destination , but in my case the destination is 120GB , its an hp M2 SSD
i went to windows disk management and it shows that HDDrawcopy tool has created a 2 new partitions one 7.31Gb and another 11MB

i think the tool is trying to create a new partition with the same size of the ISO file but it creates slightly small partition resulting in this error

please someone help me with a solution , thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group