| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| problem with HDD Raw Copy Tool 1.10 http://forum.hddguru.com/viewtopic.php?f=7&t=36321 |
Page 1 of 1 |
| Author: | nscript [ January 19th, 2018, 14:35 ] |
| Post subject: | problem with HDD Raw Copy Tool 1.10 |
please check the log below 1/19/2018 12:36:38 PM 1/19/2018 12:36:38 PM * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS 1/19/2018 12:36:38 PM ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN! 1/19/2018 12:36:38 PM 1/19/2018 12:36:38 PM Source: [0] RAW ethos-1.2.7.iso [7860.5 MB] 1/19/2018 12:36:38 PM Target: [0] HP SSD S700 120GB Q0616B1 [120.03 GB] 1/19/2018 12:36:43 PM Locking device... 1/19/2018 12:36:43 PM Copying... 1/19/2018 12:39:23 PM Write Error occurred at offset 7,851,671,552 (87) 1/19/2018 12:39:23 PM Cannot write to target, aborting... 1/19/2018 12:39:23 PM Average speed: 49.0 MB/s 1/19/2018 12:39:23 PM Operation terminated at offset 7,851,671,552 LBA 15,335,296 i have tried both portable and setup version , both results in the same thing , it reaches 100% and then stops while googling i sow that error means the source is larger than destination , but in my case the destination is 120GB , its an hp M2 SSD i went to windows disk management and it shows that HDDrawcopy tool has created a 2 new partitions one 7.31Gb and another 11MB i think the tool is trying to create a new partition with the same size of the ISO file but it creates slightly small partition resulting in this error please someone help me with a solution , thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|