Switch to full style
Tools for hard drive diagnostics, repair, and data recovery
Post a reply

problem with HDD Raw Copy Tool 1.10

January 19th, 2018, 14:35

please check the log below

1/19/2018 12:36:38 PM
1/19/2018 12:36:38 PM * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS
1/19/2018 12:36:38 PM ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
1/19/2018 12:36:38 PM
1/19/2018 12:36:38 PM Source: [0] RAW ethos-1.2.7.iso [7860.5 MB]
1/19/2018 12:36:38 PM Target: [0] HP SSD S700 120GB Q0616B1 [120.03 GB]
1/19/2018 12:36:43 PM Locking device...
1/19/2018 12:36:43 PM Copying...
1/19/2018 12:39:23 PM Write Error occurred at offset 7,851,671,552 (87)
1/19/2018 12:39:23 PM Cannot write to target, aborting...
1/19/2018 12:39:23 PM Average speed: 49.0 MB/s
1/19/2018 12:39:23 PM Operation terminated at offset 7,851,671,552 LBA 15,335,296


i have tried both portable and setup version , both results in the same thing , it reaches 100% and then stops
while googling i sow that error means the source is larger than destination , but in my case the destination is 120GB , its an hp M2 SSD
i went to windows disk management and it shows that HDDrawcopy tool has created a 2 new partitions one 7.31Gb and another 11MB

i think the tool is trying to create a new partition with the same size of the ISO file but it creates slightly small partition resulting in this error

please someone help me with a solution , thanks
Post a reply