| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Seagate Cheetah SCSI Firmware Issue http://forum.hddguru.com/viewtopic.php?f=7&t=37541 |
Page 1 of 1 |
| Author: | ddrecovery [ October 14th, 2018, 18:26 ] |
| Post subject: | Seagate Cheetah SCSI Firmware Issue |
I have a 6 x RAID 5. Usual scenario, one drive had bad sectors which we recovered, the other drive spins up and is recognized but 0GB and no access do data. This is the last drive to fail and therefore the one we need to recover. Spins up normally, no visible physical damage to the platters, so I presume this is a Seagate firmware issue. ISTR seeing software around that can fix basic SCSI hard drive issues but cannot track it down. Anyone help? |
|
| Author: | lcoughey [ October 14th, 2018, 20:44 ] |
| Post subject: | Re: Seagate Cheetah SCSI Firmware Issue |
Contact me in a PM tomorrow, if you don't figure it out before then. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|