All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 5th, 2018, 18:21 
Offline
User avatar

Joined: November 5th, 2018, 8:55
Posts: 5
Location: Guianna
Device info:
3.5" Seagate ST500DM002 Barracuda 500GB
Serial: Z3TRSXRN
P/N: 1BD142-303
Firmware: kc48
STX: 720012(b)
==========================================================
Procedures that I made:

- Check Seagate Website to new firmware or update - Doesn't exist for this version drive.
- Download tools like: seatools for windows, seatools for DOS, discwizard for windows. (done)

Seatools for windows:

- Quick test (DST Short) - Pass ! ok
- Generic short - failed !!
- Generic long full - failed !!
- other options - risk for loose data or impossible to do.

Seatools for DOS, via USB boot:

- System/application open appropriately, but after confirm "terms of use", application try to load drive, so FAILED !!
Advice: impossible to recover bad sectors, drive can NOT be read.

Seagate DiscWizard Tool For Windows:

- Clone device for another HDD - FAILED!! *** Message: Failed to read from sector "0".
- So, impossible to apply any other option.

============================================================

Linux OS:


I try to clone the device via "dd" application. So linux system can NOT find HDD into /dev/sd"N"....impóssible mount or read device.

****Impossible to clone without read device.

=============================================================

More Information:

- Seagate ST500DM002 of 500GB can't read sector "0".Then, show only 3.83GB as total storage in the Seatools application.
- Windows unable to recognize HDD. Impossibility to provide a drive letter.
- Windows unable to recognize HDD when I use SATA cable normally as a intern HDD.

===============================================================

I hope somebody help me with that !!

if there is someone with the app "HD doctor for seagate" and can share it, please, send for my email.
(thorfix.hunt@yandex.com)

Any suggestion, procedure or tool is Welcome for fix it !


Attachments:
File comment: Seagate website data available for ST500DM002 - Z3TRSXRN.
Barracuda 500GB Z3TRSXRN ST500DM002.jpg
Barracuda 500GB Z3TRSXRN ST500DM002.jpg [ 156.91 KiB | Viewed 12646 times ]
File comment: Seatool result with incorrect info !!
seatool_result_incorrect_info.jpg
seatool_result_incorrect_info.jpg [ 52.3 KiB | Viewed 12646 times ]
File comment: Discwizard Result FAIL info !
Discwizard_result_info_FAIL.jpg
Discwizard_result_info_FAIL.jpg [ 31.61 KiB | Viewed 12646 times ]
Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 2:16 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3452
Location: Greece
I bet your drive spins up, clicks and spins down.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 5:42 
Offline
User avatar

Joined: November 5th, 2018, 8:55
Posts: 5
Location: Guianna
northwind wrote:
I bet your drive spins up, clicks and spins down.


Hi Northwind,


Any idea how fix this?

regards,


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 6:13 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3452
Location: Greece
Thorix wrote:
northwind wrote:
I bet your drive spins up, clicks and spins down.


Hi Northwind,


Any idea how fix this?

regards,


Yes, it needs clean room work.
You need to have compatible donor and swap the heads. By saying "you" I mean someone who knows what he's doing and has the proper equipment, experience and knowledge.
It's not DIY in any case.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 7:47 
Offline
User avatar

Joined: November 5th, 2018, 8:55
Posts: 5
Location: Guianna
northwind wrote:
Thorix wrote:
northwind wrote:
I bet your drive spins up, clicks and spins down.


Hi Northwind,


Any idea how fix this?

regards,


Yes, it needs clean room work.
You need to have compatible donor and swap the heads. By saying "you" I mean someone who knows what he's doing and has the proper equipment, experience and knowledge.
It's not DIY in any case.


Thank you for advice. But in this case the head are running properly !

;>)


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 10:16 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3452
Location: Greece
Thorix wrote:
in this case the head are running properly


And you know this how?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 10:32 
Offline
User avatar

Joined: November 5th, 2018, 8:55
Posts: 5
Location: Guianna
northwind wrote:
Thorix wrote:
in this case the head are running properly


And you know this how?


Until my tests to finish, move head or disk are my last options. On my region there isn't clean room or good service to do that. Therefore, I'm here to get some support/help with professionals. If you know how to fix it & can share, you are welcome my friend. Any suggestion, procedure, tools, orientation is Welcome tool.

ps.: there isn't any bad sound coming from the disk or head at moment.

;>)


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 6th, 2018, 13:58 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
northwind wrote:
Thorix wrote:
in this case the head are running properly


And you know this how?


Didn’t he ask how to fix “click and spin down”??? :?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Seagate ST500DM002 Barracuda "Failed to read Sector "0"
PostPosted: November 7th, 2018, 5:46 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3452
Location: Greece
Thorix wrote:
If you know how to fix it & can share, you are welcome my friend. Any suggestion, procedure, tools, orientation is Welcome tool.


I know how to fix it and I've already told you.
The heads are gone and the drive needs clean room work.
Again, not what you want to hear, sorry about that.

If the data is important, you need to send it out to a decent DR lab. You can't fix it yourself :(
If the data is not important, bin it, move on and don't buy such a crappy drive again.

Good luck.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group