All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: HDD Raw Copy Tool...logic problem
PostPosted: January 29th, 2019, 11:58 
Offline

Joined: January 29th, 2019, 11:48
Posts: 4
Location: Austria
Hey guys,

i hope somebody can help me, but i am stuck right now...
i downloaded HDD Raw copy tool cause one of my HDD's is ultra slow (sectors are damaged)...

I want to copy all the files from the Damaged HDD (I:) to another empty HDD(X:)
The thing is...i dont know what to choose when using the HDD Raw copy tool...i guess its just my logic problem-.-

I have to select SOURCE first and then TARGET..but which one should i pick as SOURCE and TARGET?i strangely dont understand it- and i dont want to make a mistake...please help :-/ :?:


Top
 Profile  
 
 Post subject: Re: HDD Raw Copy Tool...logic problem
PostPosted: January 30th, 2019, 4:50 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
If the drive is failing, then your very likely to kill it with that tool.

If the data is at all important then send to a pro with pro hardware cloning tools, it shouldn’t cost much AT THIS STAGE.

If you don’t care for the data and accept that you’re likely to kill it for good with DIY attempts(or at least make it more expensive for a pro) then try using “hddsuperclone”. It’s free tool, search this forum.

Good luck!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group