Dear Friends,

I have a sdcard and i have to clone a file named NSTCALL.imgc to my SDCARD

Double click, i opened the file from c:\ "NSTCALL.imgc" and after that i selected the destination as SDCARD drive

Clicked START button

But its not clonning file from the source, because if cloned perfectly

"I SHOULD NOT BE ABLE TO OPEN THE SD CARD FROM THE DRIVE "

Regards,

Cochinman

Your post doesn't make any sense to me.

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service

I need to clone a file with extension ".imgc" from windows 7 pc to SD card. And I used HDD tool.

I bought a new SD card 8GB and formatted

Inserted the SDcard in the SD Apdator and placed in the SDCard slot of my laptop.

A week before i used the HDD Tool software to clone and it was succesfuly done after 2 trials.

But now I am trying to do the same to the new SDcard and its not working

You imaged card A. And now try to restore the image file to card B. Is that it?

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service

check the actual available bytes on the SD card is same or more than image.

how was image created?

you could try dd instead.

or possibly Rufus.

Dear friends

The sd card is 8 gb and the imgc format file is only 45.5 mb in size. I want to clone to my sdcard. so first i formatted the sd card and used the HDDgurutool to clone.

I did this a week before and its worked. Because anytime i try to open the sd card from explorer it says FORMAT and show only 1.5 gb total sd card space. even though the sd card is 8 gb it will never show the freespace, if the sdcard is clonned perfectly

now any sd card i try its not cloning at all. HDDgurutool still ask me to click START button after cloning

Must be me but I give up. No idea what's you're trying to tell.

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service