HDD GURU FORUMS http://forum.hddguru.com/ |
|
Compatible PCB http://forum.hddguru.com/viewtopic.php?f=7&t=40491 |
Page 1 of 1 |
Author: | sigitharjono [ October 17th, 2020, 6:20 ] |
Post subject: | Compatible PCB |
Hello, I have hd Seagate Laptop Thin 500GB with dead PCB. And i have donor pcb with similiar series (seagate laptop thin 500GB), but the firmware series is different. The broken hd firmware is HPM2 and the hd donor is HPM6. Could i exchange the ROM to get the data back? Is it compatible? Thank you |
Author: | excell [ October 18th, 2020, 19:15 ] |
Post subject: | Re: Compatible PCB |
you didnt mentioned the model of the drive. if the drive is not SED then you can do it , sure. |
Author: | excell [ October 18th, 2020, 19:17 ] |
Post subject: | Re: Compatible PCB |
the firmware is on the platter , not in the rom. |
Author: | sigitharjono [ October 19th, 2020, 3:18 ] |
Post subject: | Re: Compatible PCB |
Thank you for the answer The model is same ST500LM000. But the firmware series is a bit different HPM2 and HPM6. Is it compatible? |
Author: | pclab [ October 19th, 2020, 3:29 ] |
Post subject: | Re: Compatible PCB |
Since you already have the board, just swap ROM and test. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |