View topic - CAN U HELP ME UNLOCK MY HARD DRIVE

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

CAN U HELP ME UNLOCK MY HARD DRIVE

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

viper6703

Post subject: CAN U HELP ME UNLOCK MY HARD DRIVE

Posted: March 7th, 2006, 19:16

Joined: March 7th, 2006, 14:33
Posts: 10

HI i have a 40gb hard drive it is lock to 20gb i try to use the MHDD then i go to NHPA it ased me do u want to set native LBA address? y/n i said yes then it tell me read NHPA fail can u tell me y it saying that
now if i used a drive that say 40gb then i cut it to 20gb and i used the NHPA on that drive it work fine when i set the LBA address then i put yes it work it dont tell me fail so can u tell me y the other drive is failing i have alot of drive that is 40gb and it is lock to 20gb and everytime i try to used the LBA address it is failing ca i tell me y please thank u

Top

niddo

Post subject:

Posted: March 8th, 2006, 4:35

Joined: January 12th, 2006, 10:50
Posts: 15

Hi,

It would help if you told us the type of drive.

Some other drives will limit capacity if a single head fails.

If you can post the model number we should be able to help!

Last edited by niddo on March 22nd, 2006, 16:24, edited 1 time in total.

Top

viper6703

Post subject:

Posted: March 8th, 2006, 11:11

Joined: March 7th, 2006, 14:33
Posts: 10

some is western digital model # is WD400BB-60JKA0 ALSO I HAVE MAXTOR MODEL # IS 6E040L0711233

Top

Dmitry Postrigan

Post subject:

Posted: March 8th, 2006, 11:25

Joined: September 27th, 2005, 8:21
Posts: 765

So, did you read the FAQ?

_________________
Dmitry

Top

viper6703

Post subject:

Posted: March 8th, 2006, 12:39

Joined: March 7th, 2006, 14:33
Posts: 10

yes i did but i dont know how to Execute CONFIG command

Top

Dmitry Postrigan

Post subject:

Posted: March 8th, 2006, 15:29

Joined: September 27th, 2005, 8:21
Posts: 765

exactly the same way you executed NHPA... type it!

_________________
Dmitry

Top

viper6703

Post subject:

Posted: March 8th, 2006, 16:28

Joined: March 7th, 2006, 14:33
Posts: 10

ok maysoft i try the Execute CONFIG command i put yes the enter all the way it gave me divice error

Top

viper6703

Post subject:

Posted: March 8th, 2006, 16:37

Joined: March 7th, 2006, 14:33
Posts: 10

hey maysoft i got it i have to put yes on everything thank alot thank uthank u

Top

viper6703

Post subject:

Posted: April 18th, 2006, 9:31

Joined: March 7th, 2006, 14:33
Posts: 10

hey can some one help me unlock a maxtor drive i try the CONFIG command it dident work i try the NHPA dident work so some please tell me now what to do

Top

datasolution

Post subject:

Posted: April 18th, 2006, 10:10

Joined: April 8th, 2006, 11:11
Posts: 19

i ve one 40gb segate baracuda hdd firmware 8.01 .its detect in bios but not shown after boot it shows primery master hdd fail.then i tried it on other board it detects and even shows afterboot . i ve tried mhdd it shows that harddisk is ata password protected. so is there really any password or firmware curruption.if yes than tell me how to update this firmware.

Top

gsimon

Post subject:

Posted: April 20th, 2006, 2:02

Joined: October 7th, 2005, 2:03
Posts: 152
Location: serbia

datasolution wrote:

try with mhdd to remove password....

Top

Page 1 of 1

[ 11 posts ]

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum