HDD repair 2.0 ENG

[cetverooki]

hi to all

can someone tell me if this program is for pata drives only. i heave sata drive that this program doesent reckognise at all. if there is a setting for this program to enable sata drive please share it with me.

[pcimage]

Are you running it directly from the SATA port on your mainboard?

If so, I think HDD repair only work off IDE. So you will need to run your SATA drive through a IDE>SATA adaptor.

Sean

[rameez]

but i think sata drives have different firmware structure then that of ide so i think it will not work on sata drives .

[hddking]

i agree with u mr.sean u r right

[unknown]

can u give me the (hdd repair 2.0 eng) URL please ?

[craig6928]

its only for ide not sata

[dick]

Does this programme actually repair anything?

[rameez]

yes its a good freeware utility for repairing maxtor and WD firmware .

[craig6928]

i got this program but not sure where to get the data lead
you connect up to use it

any ideas

cheers

[N.C.]

Hi, gurus

I have one error-free and data-free donor drive, NAR61HA0, and playing with HDD repair 1.1, i have made this to NAR61HAZ.

Is there a way, to fix this kind or error with 2.0 version?
The drive has ARDENT cpu, but the hdd repair shows only DSP and POKER.

Can somebody help me a little?

Thanks,
Janos

[rameez]

Ardent = poker .

[craig6928]

so can anyone tell me where to get the data lead that you connect up to the test pins on hard drive

[sempre]

can u give me the (hdd repair 2.0 eng) URL please ?


I want to test it!

[N.C.]

Hello

Somebody have a loader for this model?

6E020L0510231, K,G,G,A, B8FEA

I have already tryd all the loader i have including the one 6E020L on the files in forum, but no one works for me.
Additionally i forget to build own loader for this drive, and now i can't make it alive again...

Thank you for all who want to help me,

Regards,
Janos

[walroro]

Hi, Someone has a loader, ram, rom, modules everything needed for fixing with HDD repair 2.0 ENG this Maxtor hdd, I think the above has to be extracted with this software and not with pc-3000.

model 4d04h2
hda 22a
pcba 09a
unique P1a
code DAK019k0
c2
4d040h22209P1 3902B679

K,G,C,B

Poker C.3 CPU
-----------------------------------------------------------------------------------------

It is detected in safe mode as: Maxtor ROMULUS F/W DAK03OKZ (should be DAK019K0?)
Also, this software gives me a message:Found:8c0 Mods

Rodrigo

[Czerno]

Hi ! I too have a failed 40 Giga Maxtor Diamond Plus 8 (Ardent; NAR61590 K,M,C,A ; 6E040L0510605). Would the free program HDDRepair, as advertised on this thread, rewrite the firmware ? ... I can't find instructions for using the program, or downloading firmware modules (are they built-in ?) - can someone charitable help just a little ?

I read the FAQs and many threads, and I do understand people who make a living out of HD repairs cannot give out all their secrets, BUT, I can't afford professional recovery by any means either. I'm all willing to try this software, HDDrepair, on the disk (it's toast anyway).

Thank you all and n particular, Maysoft for their patience and dedication.

--
Czerno

[Czerno]

And special thanks to M. Rameez...
--
Czerno

[kwar]

http://kwar.vndv.com/workshop.html

[seeprakash]

Hi All,

I am in between very similar problem, does any body know how to use this software.

Thanks,

[Iszerda]

Hi all!

What is the function of the 'Alloc' botton of this software?
I tried to guess it, but I am not sure...

Thanks